1 / 15
DIN rail 20x4 I2C LCD display case / mount / housing / box / angled / arduino / raspberry — image 1
1 / 15

DIN rail 20x4 I2C LCD display case / mount / housing / box / angled / arduino / raspberry

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

DIN rail 20x4 I2C LCD display case / mount / housing

Rating
3 / 5
Likes
8
Downloads
83
Makes
1
Views
353
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

I needed a 20x4 I2C LCD display holder that mounts to DIN rail so I threw together some models together to make these models and I improved some features.

I used this display, compare it to yours!

The angled version is angled at 30 degree.

I made a horizontal and a vertical mount,  and screw and keyhole mounts, so take what you need!

I made the case as compact as possible, so you can either make a hole in the side and run the wires out, or bend the 4 pins towards the DIN rail giving you room to plug in.

Use M3 screws to mount display (M3x6mm).

Printed with PETG

  • 15% infill

  • use supports

  • 0.2mm layer hight

  • 0.4mm nozzle

Tags