Exciter (Exciters / Body Speaker) Mount with Spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket with spacers for round exciters. Inner ⌀ 31.5 mm, outer ⌀ 43 mm, spacer height 10.2 mm, M4 mount.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount is designed to securely hold a round exciter (body speaker / surface transducer) and keep it at a defined distance from the surface using integrated spacers.
The design consists of two parts:
Exciter holder ring (snap-fit or friction fit for the exciter body)
Spacer(s) to position the exciter at the correct standoff height
The spacers have a through-hole for an M4 screw, allowing the assembly to be bolted directly to a panel or frame.
📐 Dimensions:
Inner diameter (exciter fit): 31.5 mm
Outer diameter (ring): 43.0 mm
Spacer height: 10.2 mm
Spacer hole diameter: 4.2 mm (M4 clearance)
🔩 Hardware needed:
M4 screws (length depends on your panel thickness + 10.2 mm spacer height)
Optional: M4 washer and nut on the back side
🖨 Print settings (recommended):
Material: PETG or ASA for durability; PLA works for lightweight use
Layer height: 0.2 mm
Infill: 30–50%
Supports: not required
Orientation: flat side down
This design is ideal for DIY speaker builds, acoustic panel projects, haptic feedback setups, and home automation sound systems.