Exciter (Exciters / Body Speaker) Mount with Spacers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting bracket with spacers for round exciters. Inner ⌀ 31.5 mm, outer ⌀ 43 mm, spacer height 10.2 mm, M4 mount.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount is designed to securely hold a round exciter (body speaker / surface transducer) and keep it at a defined distance from the surface using integrated spacers.
The design consists of two parts:
Exciter holder ring (snap-fit or friction fit for the exciter body)
Spacer(s) to position the exciter at the correct standoff height
The spacers have a through-hole for an M4 screw, allowing the assembly to be bolted directly to a panel or frame.
📐 Dimensions:
Inner diameter (exciter fit): 31.5 mm
Outer diameter (ring): 43.0 mm
Spacer height: 10.2 mm
Spacer hole diameter: 4.2 mm (M4 clearance)
🔩 Hardware needed:
M4 screws (length depends on your panel thickness + 10.2 mm spacer height)
Optional: M4 washer and nut on the back side
🖨 Print settings (recommended):
Material: PETG or ASA for durability; PLA works for lightweight use
Layer height: 0.2 mm
Infill: 30–50%
Supports: not required
Orientation: flat side down
This design is ideal for DIY speaker builds, acoustic panel projects, haptic feedback setups, and home automation sound systems.