1 / 2
MiniClaw U Slamfire Mech Rail and Sear With a Screw Hole
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rail me please
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Parts to add a rail to the MCU slam fire mech and a sear with a hole in it.
The sear replaces the MCU one with one with a hole for an extension spring.
The Slamfire mech has a small rmax rail on top. Use supports and print in the same orientation as the old one.