1 / 4
Filter Cover for Milwaukee M12 2351-20 Stick Light — zdjęcie 1
1 / 4

Filter Cover for Milwaukee M12 2351-20 Stick Light

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filter and Protective Cover for Milwaukee M12 2351-20 Stick Light

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
43
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a protective cover and filter for the Milwaukee M12 2351-20 Stick Light. It may fit the M18 version, if someone verifies it, please let me know. This is my first attempt at using clear/translucent filaments. I printed this with Amolen Transparent PETG. I do not have a smooth build plate, so it was printed on a textured PEI plate. I hope to learn how to print clear filament better when my smooth plate arrives. Anyway, the filters work nicely as shown in photos where I used them to illuminate a tool closet. I printed one of my early tests in basic red PETG and it let through a good deal of light despite being opaque, so this can be easily printed in almost any filament. This model will print face down without supports and will print very nicely upright with tree support.

Tagi