1 / 1
PCB Mount for Big Tree Tech Manta M8P Ver 1.0 Vertical — zdjęcie 1

PCB Mount for Big Tree Tech Manta M8P Ver 1.0 Vertical

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This mount will place a Big Tree Tech Manta M8P V1.0 vertically on a din rail. This using the standard voron din clip.

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Hello,

I printed the model from ABS to withstand warm temps. I am building a VZBOT 330 AWD and I wanted to mount the BTT Manta M8P vertically. I could not find a mount that was vertically mounted and included easy to find din rail mounts. I spaced the din mount holes 31.5MM apart and they should fit the standard voron clips. They should use thread forming m2 screws.  I designed the board to use M3 Heated Inserts.  This is my 2nd published model and I am still learning the basics. Any feedback is appriciated. 

  • I plan to work on this project a little longer and add a hex recess to the rear to be able to tighten the m3 screws without a wrench. 

  • I want to try and get more decorative with the model and maybe add a VEZ3D logo

  • I would like to try and add mounting spots for external TMC 5160s

Tagi