Slatwall Screw-Mount Adapter Peg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add screw-mount items to your slatwall without drilling holes. Features a 3mm pilot hole in an 8mm body.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is as simple as it gets, but it saves your walls. I didn't want to screw directly into my slat-walls for things that only come with screw-mount options—like coat racks, power strips, or specific tool docks.
To avoid making permanent holes in the wall panels, I made this peg that puts the screw hole in the plastic instead. It has a sturdy 8mm body with a 3mm pilot hole designed for a self-tapping screw.
Hardware Tip: I usually cut my screws to length so they don't poke through the back and scratch the actual slat-wall. If you don't want to cut them, 1/4 inch screws usually do the trick (plus the depth of whatever item you are mounting).
Print Note: Print this on its side so the slatwall hook is as strong as possible. No supports are needed for this one.