Allsky Camera V3 Upgrade - Motorized Dome [Experimental]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Complete your Allsky camera with professional enclosure
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 493
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Standard Digital File License
The ultimate allsky accessory to turn your allsky camera into a true miniture garden observatory!
Shield your allsky sensor from UV rays or keep birds off the dome during the day - many other practical uses may also exist. No change required to the Allsky V3 Dome - simply replace the outer dome ring with this upgrade.
Innovative stepped pinion gear to drive shells both in opening and closure
Designed as a 1:1 replacement of the existing V3 dome fixation ring - the stepper motor is enclosed external to the main housing:
DIY Wiring: You will require to make your own DIY wiring connection into the main dome, with modification to the existing housing to pass 5 wire motor cable.
Water Resistance: Motor enclosure optimised to avoid water ingress - but not waterproof. Long term exposure of 28BYJ-48 stepper motor to external environment to be evaluated.
Scripts: sugguested control scripts posted to my github page here for 360 forward and backward rotation from Pi4/Pi5 GPIO board.
Updates will be posted to this listing as the design evolves.
Requires V3 Allsky Camera...
V3 Installed with Dual stepper motors for focusing & motorized dome
Non-Printed Parts
GPIO Jumper wires to connect motor/driver to raspberry board
Stepper Motor 28BYJ-48 & Driver(or Pi Hat) ULN2003
Hardware - Stainless Machine Screws
M4x45mm, M4x35mm, M4 Nuts,
M3x25mm, M3x12mm, M3x6mm, M3 Inserts
Updates
8-May-26 : Added Resting Stopper (6mm OD) - Optional. I found it can additionally improve engagement of the outer shells.
