IKEA MITTZON Office Desk Leg Raiser/Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raise the IKEA MITTZON conference bench table 10cm with these leg extension sleeves.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
❤ If you like this model, drop a like to support my 3D printing addiction (er... I mean hobby)!
These leg extenders convert the IKEA MITTZON low conference table into a full-height work desk, or raise the tall variant to standing-desk height. Each extender has two sections: a solid plastic block at the bottom for strength, and an angle-matched sleeve to slide over the existing leg. They add 10 cm of height by default, but the solid block is easy to remix for other heights.
The bend in the middle is designed to preserve the desk's original footprint while maximizing the load-bearing capacity. The bottom block distributes weight evenly across its rectangular top and base. It alters the leg profile slightly, but that is a deliberate trade-off. A straight, slanted extender would be subject to uneven forces and provide less stability.
The photo shows a print in Bambu Lab white PETG-HF. The color comes out a bit bright, so I'd recommend an off-white filament instead.
Print with at least 70%+ triangle infill for peace of mind. I've tested mine for 6 months supporting a desk plus up to 150 kg of load with no visible wear.
Use felt pads on the bottom of these extenders to protect your floors, and mounting tape within the extenders so they don't fall off when carrying the desk, as your fit may vary depending on filament.
Not affiliated with, authorized, sponsored, or endorsed by IKEA. "IKEA" and "MITTZON" are trademarks/trade labels of their respective owners, used here only to indicate product compatibility. Design created from scratch, provided "as is," with no warranty of any kind. Use at your own risk.