HSW Hot Wheels System – Premium Display Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upgrade the HSW display system for wider Hot Wheels Premium blister packs using the existing modular rails.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Overview
Expand the HSW Hot Wheels Modular Display System to support wider Hot Wheels Premium blister packs.
This upgrade keeps the existing modular rail system and replaces only the components required for the wider Premium card format.
That means you can display Mainline and Premium models using the same basic rail system without rebuilding the entire display.
Included Parts
Wide Single Connector
Wide Expansion Connector
Premium Logo Topper
The existing HSW display rails are reused.
Premium Format Upgrade
Hot Wheels Premium blister cards are wider than standard Mainline packaging.
Instead of creating a completely separate display system, this upgrade uses wider connectors while retaining the original rail geometry.
This keeps the system modular and allows different Hot Wheels formats to share the same basic design.
Key Features
Designed for wider Hot Wheels Premium blister packs
Uses the existing HSW rail system
Wide single connector included
Wide expansion connector included
Premium topper included
Modular and expandable
Secure display without modifying the packaging
Easy upgrade from the standard Mainline configuration
Modular HSW System
This Premium upgrade is part of the HSW Hot Wheels Modular Display System.
The same rail components used for the standard Mainline display can be reused:
Left Display Rail
Right Display Rail
Left Bottom End Rail
Right Bottom End Rail
Only the connector width changes for the wider Premium packaging.
This makes it possible to build displays for different Hot Wheels card formats while keeping the same modular structure.
Mounting
The display system can be mounted directly to a wall, wooden panel or other suitable surface.
For integration into an HSW modular wall, use the compatible HSW mounting adapter available with the main display system.
Hardware
M3 countersunk / flat-head screws
Recommended length: 8–12 mm depending on the mounting setup
Countersunk screws provide a clean and flush installation.
Printing Recommendations
Material: PLA or PETG
Layer height: 0.20 mm
Infill: 15–25%
Supports: Not required for the main parts
Orientation: Print flat for best strength
PETG is recommended when additional durability is required.
Compatibility
Designed primarily for Hot Wheels Premium blister packaging and the existing HSW modular display rails.
Packaging dimensions can vary slightly between different Hot Wheels series and releases.
Please check your packaging dimensions if you intend to use the system with other blister formats.
Mainline + Premium
The modular design makes it possible to build a collection using both standard Mainline and wider Premium packaging without switching to a completely different display system.
Use the standard configuration for Mainline cards and this upgrade for Premium cards while retaining the same rail-based design.