Switch Safety Cover - Indian Standard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a functional, 3D printable cover designed specifically for Indian modular switch plates.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a functional, 3D printable cover designed specifically for Indian modular switch plates. It is ideal for covering switches that should not be accidentally toggled, such as those for smart home hubs, routers, or sensitive equipment.
Recommended Print Settings
Material: PLA or PETG. PETG is recommended if it will be exposed to direct sunlight or warm environments.
Layer Height: 0.2mm for a good balance of speed and detail.
Wall Loops/Perimeters: 3–4 walls for structural rigidity.
Infill: 15–20% (Gyroid or Cubic for strength).
Supports: Depending on your printer's bridging capability, you might need minimal supports for the interior recessed area.
Important Note
Safety Warning: This is a plastic cover. Ensure your print does not touch any exposed wiring. Do not use this on switches that are faulty or overheating.
Disclaimer: Use this at your own risk. PLA is generally not a certified electrical-grade material.