1 / 13
BIC Lighter Sleeves PRUSA / VORON / BAMBU | with Break-out-support & 7 grams only! — zdjęcie 1
1 / 13

BIC Lighter Sleeves PRUSA / VORON / BAMBU | with Break-out-support & 7 grams only!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

🔥🔥 MARK YOUR BIC-LIGHTER 🔥🔥 BIC Lighter Sleeves PRUSA / VORON / BAMBU | with integrated break-out-support & 7g only!

Ocena
0 / 5
Polubienia
5
Pobrania
20
Wydruki
0
Wyświetlenia
97
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

🔥🔥 MARK YOUR BIC-LIGHTER 🔥🔥

BIC Lighter Sleeves PRUSA / VORON / BAMBU | with integrated break-out-support

This are easy to print sleeves (only 5 or 7 grams) for the original BIC-Lighter with already integrated break-out-support which can be removed carefully(!!!) with tweezers or similar tools, see in the pictures.

Print it slow and at a low layer height. Some Filaments (e.g. silk, matte) are more tricky due to layer adhesion.

The sleeves come in two versions, a thin (dark grey) & a slightly thicker one (grey, recommended)! 


Printing recommendations:

- Material:              PLA or PETG
- Speed:                 30-50mm/s
- Layer Height:      0.12 - 0.16 mm
- Supports:            not needed
- Brim:                    only w/ textured Plates
- Walls:                   3-4


Tagi