BIC Lighter Sleeves PRUSA / VORON / BAMBU | with Break-out-support & 7 grams only!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
🔥🔥 MARK YOUR BIC-LIGHTER 🔥🔥 BIC Lighter Sleeves PRUSA / VORON / BAMBU | with integrated break-out-support & 7g only!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 95
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
🔥🔥 MARK YOUR BIC-LIGHTER 🔥🔥
BIC Lighter Sleeves PRUSA / VORON / BAMBU | with integrated break-out-support
This are easy to print sleeves (only 5 or 7 grams) for the original BIC-Lighter with already integrated break-out-support which can be removed carefully(!!!) with tweezers or similar tools, see in the pictures.
Print it slow and at a low layer height. Some Filaments (e.g. silk, matte) are more tricky due to layer adhesion.
The sleeves come in two versions, a thin (dark grey) & a slightly thicker one (grey, recommended)!
Printing recommendations:
- Material: PLA or PETG
- Speed: 30-50mm/s
- Layer Height: 0.12 - 0.16 mm
- Supports: not needed
- Brim: only w/ textured Plates
- Walls: 3-4
