Mounting system for Nitecore NU05v2 light to Lazer Nutz Kineticore 2.0

This model has not undergone any safety testing and is provided for demonstration purposes only. Read and follow all instructions for the bike helmet. Contact the manufacturer of the bike helmet for guidance before adding any accessories. Do not adjust or modify a bike helmet except as specifically directed by the manufacturer in written instructions.

This innovative mounting system inserts into the rear vent hole of a Lazer Nutz Kineticore 2.0 helmet and wedges into place by turning the bolt, and provides an interface to mount a Nitecore NU05 v2 light.

Design features

• Wedge action driven by the M3 bolt allows you to precisely adjust the force used to secure it, while allowing it to easily break free if it's caught on something or snags while biking.

• The depth is small enough to not enter the inside area of the helmet.

• The wedge has a variant that allows the nut to be removed after insertion. Great for testing if you are running low on nuts.

Required hardware

• One M3x16 socket head bolt

• One M3 DIN 562 square thin nut

Printing and assembly

• Choose the wedge variant (removable nut or not)

• Print the main body and wedge as oriented in the .stl files, using flex material.

• I suggest 50% infill to allow the wedge to function properly.

• There is a small rectangular opening at the bottom, to accommodate the M3 DIN 562 square thin nut.

• Slide the nut in gently. You can use the M3x16 bolt to push it in. If it's loose, you can add a drop of glue after it's inserted.

• Insert the wedge into the main body and screw the bolt in just enough to engage the nut.

Installation and removal

• Insert the mount into the rear vent hole of the helmet.

• Turn the screw until you have reached your desired tightness. (I suggest tight enough to prevent accidentally falling out, but loose enough to break free during any fall/snag while riding.)

• Insert the NU05v2 as you would with it's bike mount. It will “click” into place.

• To remove, gently lift the NU05v2 away from the mount and slide it out. Loosen the mount by unscrewing the bolt and pull it out of the rear vent.

Safety notes

• This model has not undergone any safety testing and is provided for demonstration purposes only.

• Read and follow all instructions for the bike helmet.

• Contact the manufacturer of the bike helmet for guidance before adding any accessories.

• Do not adjust or modify a bike helmet except as specifically directed by the manufacturer in written instructions.