1 / 1
Single & Double Xiaso ESP32-C5 Cases with SMA Mount — zdjęcie 1

Single & Double Xiaso ESP32-C5 Cases with SMA Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple housings for one or two ESP32-C5 boards and a SMA antenna connector

Ocena
5 / 5
Polubienia
13
Pobrania
91
Wydruki
3
Wyświetlenia
535
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Description

These are designed specifically for the Xiao ESP32-C5 boards from Seeed Studio and SMA connectors. They may be comparable with C3 boards; however, I don't have access too one to try a test-fit.  If you're well versed in the ways of soldering and GPIOs (I'm not) the two boards can share power from a single USB cable. 

P.S. please excuse the horrendous print quality from my damp filament printed on an old Prusa Mini that's well due for an overhaul....

Required Items

  • Xiao ESP-32 C5 board

  • 2x M2x10mm bolts

Printing

  • Print with flat bottom/top faces towards the build plate. 

  • Prints on a 0.4 and 0.6mm nozzle without any fitment issues. 

  • 3 walls, 20% infill, no supports requried!

  • An outer wall brim may be required if you have issues with bed adhesion. 

Assembly

  • Light deburring may be required! 

You are welcome to remix and share as you see fit; however, any commercial use is strictly forbidden!

Tagi