Single & Double Xiaso ESP32-C5 Cases with SMA Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple housings for one or two ESP32-C5 boards and a SMA antenna connector
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 91
- Makes
- 3
- Views
- 535
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
These are designed specifically for the Xiao ESP32-C5 boards from Seeed Studio and SMA connectors. They may be comparable with C3 boards; however, I don't have access too one to try a test-fit. If you're well versed in the ways of soldering and GPIOs (I'm not) the two boards can share power from a single USB cable.
P.S. please excuse the horrendous print quality from my damp filament printed on an old Prusa Mini that's well due for an overhaul....
Required Items
Xiao ESP-32 C5 board
2x M2x10mm bolts
Printing
Print with flat bottom/top faces towards the build plate.
Prints on a 0.4 and 0.6mm nozzle without any fitment issues.
3 walls, 20% infill, no supports requried!
An outer wall brim may be required if you have issues with bed adhesion.
Assembly
Light deburring may be required!
You are welcome to remix and share as you see fit; however, any commercial use is strictly forbidden!