1 / 1
Voron Trident 250 Rear Vertical Extrusion spacer 175mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer to help center the rear vertical extrusion.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The files are for a 250mm Trident. Step and Fusion file included to add 50mm and 100mm for 300mm and 350mm respectively. Part is sized to 174.9mm.
Recommended to print 2x to help position the extrusion in the middle.