1 / 5
Sega ST-V MatthewBeall Soundboard Jamma Helper — zdjęcie 1
1 / 5

Sega ST-V MatthewBeall Soundboard Jamma Helper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A case for the JAMMA helper pcb designed by matthewbeall for easy hookup of the ST-V soundboard to the Sega mainboard

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
42
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Share Alike

Sega ST-V MatthewBeall Soundboard Jamma Helper (by Clint Kolodziej)

This is a case for the JAMMA helper pcb designed by matthewbeall to allow easy hookup of the ST-V soundboard to the Sega ST-V mainboard.

During assembly, the cover for the volume potentiometer aligns using a pair of small pegs built into the POT cover, those are mainly for alignment purposes, I used a couple small spots of super glue at the edges of the POT cover to secure it permanently to the top case.

When printing this I used PLA+ with the following overrides to the defaults in my slicer software:

  • Top Layers: 4

  • Bottom Layers: 4

  • Wall Line Count: 4

  • Infill Density: 40

Hardware needed to build the case:

Updates:

  • Added additional variant with a larger chamfer around the voltmeter LED for improved visibility

Tagi