Sega ST-V MatthewBeall Soundboard Jamma Helper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the JAMMA helper pcb designed by matthewbeall for easy hookup of the ST-V soundboard to the Sega mainboard
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
Sega ST-V MatthewBeall Soundboard Jamma Helper (by Clint Kolodziej)
This is a case for the JAMMA helper pcb designed by matthewbeall to allow easy hookup of the ST-V soundboard to the Sega ST-V mainboard.
During assembly, the cover for the volume potentiometer aligns using a pair of small pegs built into the POT cover, those are mainly for alignment purposes, I used a couple small spots of super glue at the edges of the POT cover to secure it permanently to the top case.
When printing this I used PLA+ with the following overrides to the defaults in my slicer software:
Top Layers: 4
Bottom Layers: 4
Wall Line Count: 4
Infill Density: 40
Hardware needed to build the case:
Jamma Helper PCB: https://www.arcade-projects.com/threads/project-helper-board-for-mitsus-repro-batman-forever-sound-amp-board.36822/
4x M2.5 16mm screws
Updates:
Added additional variant with a larger chamfer around the voltmeter LED for improved visibility