1 / 5
Wall‑Mounted Tablet Holder for Lenovo Tab 10.1" (TB311FU) – Schuko Outlet Mount — zdjęcie 1
1 / 5

Wall‑Mounted Tablet Holder for Lenovo Tab 10.1" (TB311FU) – Schuko Outlet Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wall-mounted holder for Lenovo Tab 10.1, attaches to a Schuko outlet and keeps the tablet stable and securely in place.

Ocena
0 / 5
Polubienia
3
Pobrania
26
Wydruki
0
Wyświetlenia
232
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Noncommercial

This is a wall‑mounted tablet holder designed specifically for the Lenovo Tab 10.1" (TB311FU). It mounts directly onto a Schuko wall outlet, using the existing center screw. For a secure fit, replace the original screw with one that is approximately 10 mm longer.

The holder fits tablets around 235 mm wide and 8 mm thick. On the back, there is an integrated wall standoff that ensures the holder sits perfectly level. The distance from the top of the Schuko outlet to the wall surface is approximately 13.5 mm, and the design is matched to that spacing.

I’ve tested this model in PETG and ABS, both of which work great. PLA should also be fine if the environment doesn’t get too warm.

Features:

  • Designed for Lenovo Tab 10.1" (TB311FU)

  • Mounts directly to a Schuko outlet

  • Uses a screw ~10 mm longer than the original

  • Built‑in wall standoff for perfect alignment

  • Fits tablets approx. 235×8 mm

  • Strong and stable design

Recommended Print Settings:

  • Material: PETG / ABS / PLA

  • Layer height: 0.2 mm

  • Infill: 20–30%

  • Perimeters: 3

  • Orientation: Print upright (vertical)

    • This gives the highest strength on the front lip

    • Also minimizes the amount of support needed

  • Supports: Required

    • Use Tree Support – “Build Plate Only”

    • This gives clean removal and avoids support scarring inside the holder

  • Nozzle: 0.4 mm

  • Bed temperature: according to material

Tagi