Wall‑Mounted Tablet Holder for Lenovo Tab 10.1" (TB311FU) – Schuko Outlet Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall-mounted holder for Lenovo Tab 10.1, attaches to a Schuko outlet and keeps the tablet stable and securely in place.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
This is a wall‑mounted tablet holder designed specifically for the Lenovo Tab 10.1" (TB311FU). It mounts directly onto a Schuko wall outlet, using the existing center screw. For a secure fit, replace the original screw with one that is approximately 10 mm longer.
The holder fits tablets around 235 mm wide and 8 mm thick. On the back, there is an integrated wall standoff that ensures the holder sits perfectly level. The distance from the top of the Schuko outlet to the wall surface is approximately 13.5 mm, and the design is matched to that spacing.
I’ve tested this model in PETG and ABS, both of which work great. PLA should also be fine if the environment doesn’t get too warm.
Features:
Designed for Lenovo Tab 10.1" (TB311FU)
Mounts directly to a Schuko outlet
Uses a screw ~10 mm longer than the original
Built‑in wall standoff for perfect alignment
Fits tablets approx. 235×8 mm
Strong and stable design
Recommended Print Settings:
Material: PETG / ABS / PLA
Layer height: 0.2 mm
Infill: 20–30%
Perimeters: 3
Orientation: Print upright (vertical)
This gives the highest strength on the front lip
Also minimizes the amount of support needed
Supports: Required
Use Tree Support – “Build Plate Only”
This gives clean removal and avoids support scarring inside the holder
Nozzle: 0.4 mm
Bed temperature: according to material