Lenovo ThinkCentre M720 Tiny RTL8125B 2.5G Backplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A backplate for using the single port RTL8125B network cards with the Lenovo ThinkCentre M720 Tiny.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A backplate for using the single port RTL8125B network cards with the Lenovo ThinkCentre M720 Tiny. Tested and fits the Fenvi 2.5G RTL8125 PCI-E network card, but should fit most other models and brands as they seem to use the same dimensions and design.
Known compatible NICs
Model | Image | Buy |
|---|---|---|
FENVI 2.5G PCI-E To RJ45 Network Card RTL8125B |  |
As stated above many more RTL8125B single port PCI-e 2.5G ethernet NICs are probably compatible as they seem to use the same mounting holes. In addition both the v1 and v2 version, with and without the FENVI logo on the heatsink are compatible.
Assembly
It re-uses the screws included with the M720q and network card, simply screw them in their appropriate holes.
Printing
I have used dirt-cheap black PETG which is holding up fine. Try to avoid PLA as it probably won't hold up very well to the higher temperatures a homelab and the inside of the M720q may experience. I recommend PETG, ASA, ABS or some other plastic which holds up fine to temperature.
I printed with a 0.6mm nozzle on a Ender 3 v2 using default slicer settings, that worked fine and yielded a good-enough result. Any nozzle size ≤0.6mm should work fine too.
I printed with a 0.2mm layer height but I am sure this too can be tweaked quite a bit
No supports are needed on either model
Print the back of the plate face down on the the bed