Frolic Direct Bong Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Direct to bong adapter using the glass piece of the mighty/crafty adapter
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Open Community License v1
Limelight Frolic to bong adapter using the glass piece from the Crafty/Mighty bong adapter. It should also fit various mighty/crafty glass stems.
I recommend printing it in ASA or another more heat resistant material. That said, I did all of my test prints in PETG, and they had no problems during single sessions. With heavy use, however, the material may soften.
The outside decoration is maybe a bit off. I only printed with a 0.6mm nozzle… so the details came out a bit blob-like :) It's hard to judge how accurate they actually are.
It fit is intentionally very snug, so keep the flow rate <=100%.