Ender 3 V2 to Voron Switchwire Y Extrusion Relocation Drilling Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ender 3 V2 Switchwire mod strengthens Y extrusion mount by drilling extra tapped holes using existing ones for alignment
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
While converting my Ender 3 V2 to a Voron Switchwire, I noticed that the standard conversion relocates the Y extrusion and secures it with only two screws.
I wasn't comfortable relying on only two fasteners to hold a structural frame member. To keep a more rigid and square attachment, I decided to drill and tap additional mounting holes in the extrusion.
This guide uses the existing holes and screws for alignment and accurately positions the additional holes required for the modification.
After successfully using it on my own printer, I decided to share it in case other builders prefer a more robust mounting solution as well.
Features
Designed for DaRk_dOg's Ender 3 V2 to Switchwire conversion
Uses existing holes and screws for accurate positioning
Allows drilling additional mounting holes in the Y extrusion
Reduces measuring and marking errors
Printed and tested on my own build
Measure twice, drill once. Use at your own risk.