Zalman S5 3.5"/2.5" HDD caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HDD tray for a single 3.5" or 2.5" SATA drive compatible with the Zalman S5 ATX mid-tower computer case
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Bought my PC second-hand, one of the HDD mounts were missing. I modelled a replacement based on the one I had and tweaked it to be more 3D-printing friendly.
Recommended print settings
PETG
It might work with PLA, but it might not be flexible enough to safely insert a 3.5" drive
3 perimeters
I managed to press in one of the pins when using 2
No supports
0.15mm layer height
I have not tested the flexible arch with different settings
Printed with Prusa MK4S / Prusament PETG Matte Black / 0.15mm STRUCTURAL / 3 perimeters.
Compatibility
Only tested on the Zalman S5. Might be compatible with other cases, but I did not have luck printing caddies for other versions for mine.
I erred on a slightly tighter fit as I was not sure how the spring mechanism would age.
CAD model attached.