1 / 1
Spray Bottle Assist - Against Finger Fattigue — zdjęcie 1

Spray Bottle Assist - Against Finger Fattigue

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple ergonomic attachment designed to reduce finger strain and fatigue when using spray bottles.

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
58
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Spray Bottle Assist: Against Finger Fatigue

Note: as this allows you to put a lot of strength to the sprayer, try to not go all out, and get a feel for it first, it requires almost no strength.

A simple ergonomic attachment designed to reduce finger strain and fatigue when using spray bottles. This assistive device enlarges and improves the spray trigger interface, allowing users to apply force with more of their hand and upper torso, instead of relying solely on finger strength.

The design is especially useful for elderly users, people with reduced hand mobility, or anyone who frequently uses spray bottles for cleaning, gardening, or household tasks. By improving leverage and distributing pressure more comfortably, it helps make repeated spraying easier and less tiring.

Designed for easy 3D printing, the model requires minimal assembly and can be adapted to different spray bottle trigger designs.

For now required, but trying to minimize:
3D-Printer
2X M3 Short or long inserts, nuts are optional but aren't captive.
2X M3 Screws (hex) At least 16mm long. Shorter isn't recommended longer is possible.

Print at 0.12mm resolution for cosmetics and detail for the holes.
Print at 0.28mm height for speed, and rough details.

Option A:
Many clamps (A+B) + Many handles.

Option B:
Many Clamps (A+B) + One handle.
The handle is semi-flexible so you can easily move it around other bottles.

Pro Tip:
This design shines if you use the same style,or brand of cleaning product a lot (if their empty). Companies tend to not change the spray bottle design a lot, so you could unwind the top sprayer and re-use it on a re-filler or new bottle. Safes the hassle for now to re-install the clamp.

Here is a very amateurish video:

Tagi