1 / 2
print in place 5/8 inch diameter kayak friction plug (O-ring needed) no supports needed
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this for my Lifetime Chute 98 Kayak using PLA+. It requires a rubber O-ring to keep water out and stay in place.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I made this 5/8 inch diameter friction plug for my Lifetime Chute 98 Kayak using PLA+. It requires a rubber O-ring to keep water out and stay in place. It has plenty of room for some twine or some other small string to tie to the top of the plug. This is an unofficial replacement part for the Lifetime Chute 98 kayak. I do not own the rights to Lifetime. Enjoy! :)
