Dishwasher Lower Arm Spray Nozzles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dishwasher lower arm replacement spray arm nozzles for the Tricity Bendix TBDW41 but will fit others like my Zanussi
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of a replacement spray arm nozzles for the Tricity Bendix TBDW41 but will fit others, including my Zanussi ZDT 6256, other Zanussi models and also Electrolux models.
Like a comment on the original model, I had to increase the model scale by 1.03 but this is already done in my remix model. No need to make the change in your slicer.
I also made the following changes:
Added bigger retainer ramp (1.2mm) on sleeves
Added wider and curved retainer clips on each nozzle
Added thicker top & side layers to retainer clips on each nozzle
Added fillet to top of retainer clips on each nozzle
Added fillets to both upper/inner sides of lower arm spray nozzle as walls too thin even with 0.15mm print
It has more robust retaining clips and the insert sleeves have a deeper retainer ramp to keep the entire solution on the metal arm
I printed using PCTG due to heat resistance, and durability. ASA would also be suitable. I would not recommend PETG (unless you can source PETG that can handle 90+ degrees C) and never use PLA!!!!!
I printed with support, organic/trees. See project file for orientation.