Dishwasher Lower Arm Spray Nozzles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dishwasher lower arm replacement spray arm nozzles for the Tricity Bendix TBDW41 but will fit others like my Zanussi
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of a replacement spray arm nozzles for the Tricity Bendix TBDW41 but will fit others, including my Zanussi ZDT 6256, other Zanussi models and also Electrolux models.
Like a comment on the original model, I had to increase the model scale by 1.03 but this is already done in my remix model. No need to make the change in your slicer.
I also made the following changes:
Added bigger retainer ramp (1.2mm) on sleeves
Added wider and curved retainer clips on each nozzle
Added thicker top & side layers to retainer clips on each nozzle
Added fillet to top of retainer clips on each nozzle
Added fillets to both upper/inner sides of lower arm spray nozzle as walls too thin even with 0.15mm print
It has more robust retaining clips and the insert sleeves have a deeper retainer ramp to keep the entire solution on the metal arm
I printed using PCTG due to heat resistance, and durability. ASA would also be suitable. I would not recommend PETG (unless you can source PETG that can handle 90+ degrees C) and never use PLA!!!!!
I printed with support, organic/trees. See project file for orientation.