C920 Mount with 2020 Arm Clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Logitch C920 mount - heatset used to make it rotating
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The low profile mount I remixed this from was great but I wanted a corner mount.
This seemed like a simple solution and seems to have stood up pretty well so far. Printed in ASA for me but I'm sure ABS would be fine. I used the standard Voron print settings so the heatset sat well (uses a normal M3x5x4) so 4 wall loops, 5 top and bottom layers
The twistlock arm is based on the Voron cable anchor: https://github.com/VoronDesign/Voron-Trident/blob/main/STLs/electronics_bay/cable_frame_anchor_x9.stl
The twist lock arm vibrated a bit though causing a blurry image. The arm v2 is way more solid and uses an M3 hammerhead nut so you can remove it easily. I've left the v1 arm in case it's useful to anyone.