1 / 5
Extension Legs for DREO DR-HTF007 Tower Fan — zdjęcie 1
1 / 5

Extension Legs for DREO DR-HTF007 Tower Fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Legs clip onto base of fan to add height and throw distance. Legs can be doubled up once to get even more height.

Ocena
0 / 5
Polubienia
0
Pobrania
10
Wydruki
0
Wyświetlenia
57
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

The legs clip onto the base of the fan to add height and throw distance. The legs can be doubled up once to get even more height.

The clip fits over the rubber feet that are already on the fan's base. Then, with very gentle angling and sliding, the clip will snap into place over the top lip of the base.

The clip and legs slide together easily using interlocking joints. The legs have the joint slots on the top and bottom so that more than one leg can be put together to extend the fan even further. However, I recommend two (2) extension legs MAXIMUM. Any longer and the legs will bend too much and might snap.

Tagi