1 / 1
Large soap dish
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soap dish to hold larger bars.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
Simple dish without bottom that can hold larger bars of soap. The shape helps with drying to avoid making a goopy mess. Side without a wall is supposed to be oriented forward, towards the sink, to allow excess water to escape.
Dimensions: 118mm x 84mm x 20mm
Filament used on the photo: Filamentum PLA Extrafill "Traffic White"
Printing instructions
PLA with 0.2mm QUALITY preset in PrusaSlicer, seam position = rear.
Additional notes:
- PETG (or any warp-prone filament) will probably warp significantly with this geometry.
- If you use a different slicer: the preset is 2 perimeters and 15% gyroid infill.
- Extra-sturdy version: 7 perimeters. Will get you almost perimeter-only print, but needs 30g more filament and 2h more print time. Personally, I find this excessive - normal version is very sturdy as is.
- No supports needed - bridges on top came out fine for me.