Better Switch for Honeywell TurboForce Fan HT900E / Besserer Knopf für Ventilator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
German version below! Replacement for the poorly designed control switch on the Honeywell TurboForce (HT900E) fan.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 122
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed in PLA+, STRUCTURAL setting with 0.2 mm layers, 2 perimeters and 25% infill.
One of the most popular fans on Amazon at the moment is the “Honeywell TurboForce” (HT900E), and I bought one myself last year. It produces a decent amount of airflow, but it has one major flaw: the control switch is positioned so awkwardly that it’s almost impossible to use if you have ‘thick fingers’ :-)
But since you can solve almost any problem with a 3D printer, that’s no problem at all!
I first tried the version of a new switch from Vedel_309243. But that didn't fit for my fan, as mine has a D-shaped shaft fitted. So I revised the design and created the correct cut-out for a form-fit connection. Now you can operate the switch easily and without looking – it fits, sits securely and has (no) play!
Please do pop over to Vedel's page and give him a ‘like’.
Have a lovely summer! :-)
======
Gedruckt in PLA+, STRUCTURAL setting mit 0.2 mm Layern, 2 Perimetern und 25% Infill.
Einer der beliebtesten Ventilatoren auf Amazon ist derzeit der "Honeywell TurboForce" (HT900E) und auch ich habe ihn mir schon im letzten Jahr zugelegt. Er macht ordentlich Wind, hat aber einen entscheidenden Fehler: Der Bedienknopf ist so ungünstig positioniert, dass man ihn mit "dicken Fingern" :-) kaum benutzen kann.
Aber da man mit einem 3D Drucker fast jedes Problem lösen kann, ist das kein Problem!
Ich habe zunächst die Variante von Vedel_309243 ausprobiert. Aber die passt bei meinem Exemplar des Ventilators nicht gut, da hier für den Knopf eine Achse mit D-Form verbaut ist. Ich habe daher das Design überarbeitet und den korrekten Ausschnitt für eine formschlüssige Verbindung erstellt. Jetzt kann man den Knopf einfach und ohne Hinzuschauen bedienen - Passt, sitzt und hat (keine) Luft!
Bitte schaut auch bei Vedel vorbei und gebt ihm ein "like".
Habt einen schönen Sommer! :-)