Askar Universal Losmandy-Style Dovetail Full Plate Series
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Askar Universal Losmandy-Style Dovetail Full Plate Series
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I introduce the Askar Universal Losmandy-Style Dovetail Full Plate Series.
200mm Completed
300mm Completed
400mm Completed
500mm (In Progress...if I can find a reliable diagram...)
I have added a line of holes every 10mm on the dovetail parts and the end user can use as many as they please. These holes are meant to reinforce the dovetail portion so as to not allow anything to delaminate incase the user over tightens onto the dovetail too much.
Along their perspective dovetails there are 36 holes for the 200mm plate, 56 holes for the 300mm plate, and 78 holes for the 400mm plate. Each hole accepting an RX-M3x5x4 thread insert Ruthex Made for Voron and a 14mm M3 screw with a cylinder head. Everything is flush so none of them should interfere with any equipment.
I have made half and full versions for the 300mm and 400mm plates. 200mm plate is full plate as I think every printer today has a build plate capable of this. If you have a smaller printer then you can print two halves. I don't see a reason for me to attempt to make them connect as their own full plate. Just attach both to the Losmandy rail of your scope. You may need a few more bolts but it should work.
I would advise on printing at 100% infill and using all holes to reinforce that dovetail. No sense in risking delamination with hundreds or thousands of dollars worth of equipment attached to save an hour of time and $15 worth of hardware.
I am NOT responsible if you use this and something fails. Ensure your equipment is secure.
I have not tested max load capacity. It's up to you to determine that. The plates are dimensionally accurate and at 10mm thick...I would think at 100% infill each plate should hold a fair bit.
Photo showing the screws...ignore me pointing to the 6mm (Pic was for another project). You need the 14mm screw.
Future additions I think I'd make here:
Askar Universal Losmandy-Style Dovetail Plate 500mm. Full and half lengths.
Askar Universal Vixen-Style Dovetail Plate of varying lengths.