Liczymy pasujące modele…
A miniature of "tetrapod", a concrete breakwater structure. The dimensions are based on this page from a Japanese company. Default size is about 5 cm in height. The model in the STL is in a position that seems easier to print. But there…
Wydruk około 1,55 €–1,89 € nettoWstępna wycena jednego wariantu
I made a wall mount for Tapo C210 WiFi camera. It should work with other Tapo cameras because I think they have the same mount. Made it in 4 parts for easy printing. Easy to put together, glue recommended. There are holes for screws on…
Wydruk około 7,46 €–9,12 € nettoWstępna wycena jednego wariantu
English I made this model for my Vaporesso LUXE XR MAX there is a slot to slide the usb C cable inside, for the cable I used a usb C fast charge from Xiaomi (it is possible that it is a little bigger than the ordinary ones) you can pass…
Wydruk około 3,69 €–4,51 € nettoWstępna wycena jednego wariantu
Indianapolis Colts 1st layer White 2nd Blue
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
Had problems with the visible area in the picture of the camera. Had to tilt it a little bit down, that is what this stand is for. Has a bajonett like the original wallmount. Used PLA, supports needed for the bajonett.
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
Tatooine Moisture Vaporator
Wydruk około 4,29 €–5,24 € nettoWstępna wycena jednego wariantu
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Wydruk około 13,68 €–16,72 € nettoWstępna wycena jednego wariantu
How to Print all the gcode files or more explicitly: 2 x nut.stl 1 x arm.stl 1 x base.stl 1 x mount.stl arm.stl must be printed with 100% infill so it's strong and doesn't break when adding the nuts. supports are not needed Preparing the…
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
So, I had a print in place capo for my electic guitar that broke and it made a lot of buzz cuz i couldnt find a O-ring to put in it. Then i found a model on thingiverse that used a rubberband but that was really weak and broke. So now,…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
🇬🇧 Here is a Tapo C200 camera mount for the Ikea Skadis panel. Printed in 0,2mm with 20% infill (The camera isn't heavy). The hooks need supports to print. Fusion 360 file included if you want to make changes. 🇫🇷 Voici un support de…
Wydruk około 1,94 €–2,37 € nettoWstępna wycena jednego wariantu
Zapotec Dice Tower.
Wydruk około 31,80 €–38,87 € nettoWstępna wycena jednego wariantu
I didn't want to use the screw that the original mount requires. My crib wall is ~19mm thick so I cut small chunk out of the original model such that the gap was ~20mm. While it makes the model less versatile, it is a little more…
Wydruk około 2,78 €–3,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
On July 20th, 1969, the world felt just a little bit larger as Neil Armstrong and Buzz Aldrin set foot upon the lunar surface – the first humans to ever do so (only after leaving their friend Michael Collins alone in orbit about the…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement vaporizer head for NE-C28P, 3D design thanks to Mervin
Wydruk około 2,78 €–3,40 € nettoWstępna wycena jednego wariantu
Bandeja apoyabrazos MG ZS Hybrid+. Atención solo sirve para el modelo Hybrid+ 2024 - 2025. MG ZS Hybrid+ armrest tray.
Wydruk około 13,31 €–16,27 € nettoWstępna wycena jednego wariantu
This is a remix of https://www.thingiverse.com/thing:3592040 changing the drone LEM into a watch display for your Omega Speedmaster MoonWatch. I increased the scale and added a LEM cup to hold the watch in place. Omega has created a LEM…
Wydruk około 7,13 €–8,72 € nettoWstępna wycena jednego wariantu
Car Bonnet Lock Catch Repair Handle For Citroen Berlingo Peugeot Partner 2008-on 7934e7 Automobiles Handle Opener
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
Corner mount for tapo camera C520WS C510W I made the model so the camera holes fit in those models, if you need any other size just let me know or remix it. I've also added a PDF with the 1:1 scale of the entire thing, just print it on an…
Wydruk około 7,98 €–9,76 € nettoWstępna wycena jednego wariantu
This is a storage solution for the classic wargame Command and Colors Napoleonics from GMT games . As the game has three different piece sizes, I have divided them in three trays: Infantry : 180 pieces Cavalry : 77 pieces Artillery and…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
This puzzle was invented Stewart Coffin and described in his book “The Puzzling World of Polyhedral Dissections”. There it is shown made out of wood. The first 3d printed version it seems was made around 2013 by Steve Nicholls and Simon…
Wydruk około 17,63 €–21,54 € nettoWstępna wycena jednego wariantu
Priehľadný akrylový kryt som použil z atrapy bezpečnostnej kamery od výrobcu ORNO typ OR-AK-1210. Priesvitný kryt z uvedeného typu atrapy pasuje presne na vymodelované kolíky v hornej časti krytu. Pre fixaciu sú použité 4 ks podložiek ,…
Wydruk około 0,55 €–0,68 € nettoWstępna wycena jednego wariantu
This is a little box for herb storage, made to fit inside the Pax Vaporizer case from this link: https://www.printables.com/model/705119-pax-23mini-vape-charger-case-combo-storage But you can always print and use it however you like, as a…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Use StandBy to view information at a distance while iPhone is charging You can use StandBy to turn your iPhone into a bedside clock, a photo frame, a display for viewing widgets or Live Activities in full screen, and more. - iPhone User…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
Mount select TP-Link camera models on a standard quarter-inch thread using the existing twist-lock base. This is a copy of the existing twist-lock mount, but with threads for mounting on a tripod or similar, if you don't want to drill…
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a modification of Stamos's remix of the Tripod Mobile Phone Clamp. A base plate for GorillaPods was added.
Wydruk około 4,25 €–5,20 € nettoWstępna wycena jednego wariantu
This basic roman column container measures 34.8 mm x 40 mm and is 56 mm high. You can use it as a stand to add importance to any small object, as a container, or as the start for a miniature Vaporwave party. The lid and the bottom of the…
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
Support Mural Plafond pour TP-Link Tapo Caméra Surveillance Tapo TC70 / TC65 / C500 / C310 / C225 / C210 / C200 / C110 / C100 Vis Trapézoïdale et écrou M4. Enlever les petit patin anti glisse sous la caméra avant insérer la pièce A.
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
-Credit to: ice05rub -this is not my model I did not make it! -this is a f22 raptor on a stand -please check out ice05rub account on thingverse this is his model not mine!
Wydruk około 4,77 €–5,83 € nettoWstępna wycena jednego wariantu
A simple stand or wall mount for Camera Tapo C200 & C210. The stand is available in several height variants (if you need a different one, let me know and I will add it).
Wydruk około 1,85 €–2,26 € nettoWstępna wycena jednego wariantu
simple camera TAPO C110 holder for Prusa mini+
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
Add your T-Link Tapo C100 camera to the inside corner of your Original Prusa Enclosure. Mouns via a single hole using a M3x8 screw, screw will cut the threads. If you find the holes are too loose or tight for your printer, you can edit…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PARAMETRIC - Hexagonal Toolbox IT UNROLLS Flat giving you access to all drawers and pods Useful for specialised toolkits or toting around your DND mini's STEP files included so you can add dividers to pods or specialise the pods to hold…
Wydruk około 7,11 €–8,69 € nettoWstępna wycena jednego wariantu
Kamera funguje ako cloudova a system ONVIF takže je možne sa pripojiť akokoľvek. Ja to mam nastavene aj cez iSPY a funguje bez problémov. Veľmi kvalitné je nočné videnie, takže tlačím v absolútnej tme a predsa vidím absolútne všetko.…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Decorative Teapot Planter. Made with Scaniverse app, Blender, and MS3dBuilder. Noticed bottom was not flat in prusaslicer and did a quick cut. Note: no hole in spout.
Wydruk około 13,50 €–16,50 € nettoWstępna wycena jednego wariantu
Kloubový držák upravený na nasunutí na svěrku XTline 8 cm. Spoj na tyčce vyztužený převlečným válečkem. Díru ve spodním komponentu si případně upravte podle své svěrky. (Tinkercad) Kamera je na destičce zajištěna dvěma jistícími sponkami.…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PLA 7,5 % Infill 0.2mm height no support
Wydruk około 7,77 €–9,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a 3D-printable mold for casting a concrete teapot warmer designed to fit the IKEA RIKLIG teapot. The stand not only provides a stable base for your teapot but also features a built-in space for a tea light candle, allowing you to…
Wydruk około 15,65 €–19,13 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Holders, gun hangers and others. For wall mounting or wooden cladding. You have 4 sizes from me: 60mm, 70mm, 80mm and 90mm. Just choose the color, material and…
Wydruk około 4,13 €–5,05 € nettoWstępna wycena jednego wariantu
Hier findet Ihr eine Kamerahalterung für eine Tapo C100 Kamera. Ich plane Sie an 3030 Aluminiumprofilen zu befestigen um damit den Drucker zu überwachen. Der Halter kann jedoch auch überall anders verwednet werden. Zur Montage wird der…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Porta sapone da viaggio. Soap Holder
Wydruk około 3,39 €–4,15 € nettoWstępna wycena jednego wariantu
Las medidas de la foto están en mm por lo que realmente son unos 6'5 cm de ancho y 3'7 cm de alto aprox.
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Hey Everyone! As I've been studying the Yucatec Maya people and I've found what I've learned interesting, but over the past three months one bowl stood out to me for some reason. The model was an interesting challenge because it wasn't…
Wydruk około 12,30 €–15,03 € nettoWstępna wycena jednego wariantu
EN: A device with hooks and a tray where objects can be placed, that is easy to attach to mounted parasols with a stand up to 39 mm, using a snap-on mechanism. Can be easily fixed in the desired position with 2 screws and, thanks to the…
Wydruk około 7,57 €–9,26 € nettoWstępna wycena jednego wariantu
Punic Grimacing Apotropaic Mask (Carthage / Phoenicia) Punic Apotropaic Mask, originating from the Carthaginian Empire (centered in modern-day Tunisia) and its Mediterranean colonies around the 6th to 4th century BCE. The Apotropaic Grin:…
Wydruk około 12,65 €–15,46 € nettoWstępna wycena jednego wariantu
I had lost the small plastic part, which is needed to operate the capo. I was short of time and could not wait for the order to be delivered, so I quickly printed one for myself. Printed with “0.10mm details” to get the screw thread fine…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Spoj obsahuje dvě verze v stl. Zkosený model na rohu stolu a nezkosený. Vhodné tisknout různobarevně. Zpracováno Tomášem Bárnetem, žákem 3. ročníků oboru truhlář.
Wydruk około 0,61 €–0,74 € nettoWstępna wycena jednego wariantu
What? This is a chonky lamp which can also protect your living room coastline from erosion. And let's be honest, who doesn't like a versatile lamp? Warning: If you are not comfortable working with mains voltage, seek professional…
Wydruk około 28,97 €–35,41 € nettoWstępna wycena jednego wariantu
Školní pomůcka pro truhlářské a tesařské obory. Model po složení stojí sám. Vhodný pro Odborné a technické kreslení a matematiku. Vhodné tisknout různobarevně. School aid for carpentry and carpentry. The model stands alone after assembly.…
Wydruk około 4,70 €–5,74 € nettoWstępna wycena jednego wariantu
Simple stand to be used to see whole floor in kitchen, mainly to see what our dogs are doing. Ready to be printed. Used with PLA.
Wydruk około 2,24 €–2,74 € nettoWstępna wycena jednego wariantu
Upevnění kamery Tapo na zeď vertikálně či horizontálně - Tapo camera mount on the wall vertical or horizontal
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
Simple mount for the AlzaPower M200 90W charger. I used it to hide the charger under my standing desk. You will need 4 M3 screws for mounting.
Wydruk około 1,19 €–1,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With this you can attach four Tapo C325WB cameras top of one 2cm x 2cm x 2m pole and use them as your "all-sky" camera. Wires can be guided through the base. PETG, 15% infill, 0,2mm layer
Wydruk około 13,81 €–16,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Rather difficult to find the part or at a high price. I designed in Fusion 360 and 3D printed a prototype 1st with low cost recycled SAKATA 3D PLA with 0.25 layer height and 5% infill Then after model changes in Fusion 360 I printed the…
Wydruk około 4,55 €–5,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pieza realizada en freecad y parametrizada en hoja de calculo para cambiar sus dimensiones. Tamaño de pieza. grosor del metal de la pata de la estantería. Altura de la pieza entre el suelo y la pata de metal. …
Wydruk około 0,43 €–0,52 € nettoWstępna wycena jednego wariantu
Sonnenfilter für TS APO 100Q Dieser Sonnenfilter wurde speziell für meinen TS APO 100Q Refraktor entwickelt und in Prusament PETG gedruckt. Druckeinstellungen: Schichthöhe: 0,20 mm (SPEED) Material: Prusament PETG Stützen: Überall Infill:…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is designed to provide similar MOI to the final steel weapon on Mini Mulcher. It will let you test the weapon system a lot more safely than with a metal weapon that can really injure someone. Print instructions Make the final part…
Wydruk około 5,10 €–6,23 € nettoWstępna wycena jednego wariantu
Für lilac (auch unter XAGOO bekannt) Teekanne mit Sieb. → Amazon: https://www.amazon.de/gp/product/B01N1S7S2X/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Da der originale Teesiebhalter bei einem meiner Büroumzüge abhanden kam, musste…
Wydruk około 2,55 €–3,11 € nettoWstępna wycena jednego wariantu
I deliver print with PETG at 240 degrees, without supports, on a 90 degree grain plate and with a print fan.
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Víčko na truhlíky aquaponie. Pro zabránění padání nečistot do systému. Ø 48 mm - prstenec do truhlíku
Wydruk około 4,80 €–5,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Tesa Powerstrip holder for shower basket
Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Lens hood alternative for Voigtlander 50mm APO-Lanthar VM (Leica M mount) https://www.voigtlaender.de/lenses/vm/50-mm-120-apo-lanthar-aspherical/ FIlament - PLA (can be also ABS/ASA) Infill - 50% (to be strong enough) Layer - 0.2 mm is OK…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
minimalist indoor planter with an overflow drainage base that allows excess water to evaporate naturally. Easy to print.
Wydruk około 5,01 €–6,12 € nettoWstępna wycena jednego wariantu
Original piece of plastic keep broking and you can only buy new full shower kit. So I made this little plastic spare part! :-)
Wydruk około 0,52 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Concrete block to be piled up to protect sea shore Printed in PLA, 200 µ layer. I used support on the printbed.
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Robot Select de maytronic
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
just print out no parts just simple printing easy to print.
Wydruk około 13,94 €–17,04 € nettoWstępna wycena jednego wariantu
100x160mm sign, with text “Hexapodia is the key insight.” Never trust the skrode. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of…
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
Little Green Army : Napoleon Dynamite : Napoleon/Tina/Pedro
Wydruk około 1,52 €–1,85 € nettoWstępna wycena jednego wariantu
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. Update - 2/20/2026: If you care about the future of 3D printing……
UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these models at your own risk. There is an updated version 2.1 of this Dummy 13 Weapons Pack,…
This is a remix of the awesome Ratcheting Capo by LoboCNC . Print it in place, no supports necessary. It works (surprisingly) really well. I've printed a few and I keep them in all my guitar bags because I often forget my main metal one…
Check out https://www.prusaprinters.org/prints/132320-improved-one-piece-capo for an improved version of this capo. No fiddling with screws and levers - this one-piece capo clips on with one hand. The presser bar is contoured for a…
This is a Heavy Weapons Pack for the Dummy 13. It contains - Gatling Gun - Bazooka - Barrett M82 - 2x Desert Eagles
Pikapool! https://www.thingiverse.com/thing:2787813 For multi-color setups like Mosaic Palette, MMU or X1 Carbon with AMS.
Remix Dummy 13 Weapons Pack Version ORIGINAL: https://www.printables.com/model/681425-dummy-13-weapons-pack-version-20
04. Jan. 2024 DE50 detailed with silencer (UGH) Additional holster variant 28. Dec. 2023 Redesigned the hands to ease printing 3MF file added 27. Dec. 2023: Revised as a set New armed hands New Desert Eagle 50 for UGH added New Holsters…
Subscribe Now! Time-lapse print video : https://youtu.be/6LVUM_R6hHY Remix to support free and printed. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! Addiction to 3D Printing? Watch these time-lapse!…
Tapo Gundam Original Skin Hello all, apologies I was away for traveling... The file is originally from a chinese printable user that has it made for another tapo version. I have a C220 at home and I had to make some adjustment and seems…
More stylish! More functional! More printable! This is an improved version of my earlier guitar capo that includes a number of improvements: Rubber in the presser bar frets the strings with no buzzing and with less force. (I've also…
Vaporesso XROS 3 Series Drip Tip This is a remix of a model made by CHAOSXSPIRIT that can be found here. I have changed the drip tips design by making it smaller so it prints faster, is more comfortable, and uses less filament. I have…
Chachapoyan Fertility Idol aka Golden Idol from the Indian Jones movie Raiders of the Lost Ark (1981). Using Fusion 360 I was able to reduce the mesh by 75% without losing too much quality. PolyLite Silk Gold: https://amzn.to/46fmrag 1:1…
Magnets in the shape of Shurikens, one of the Ninja weapons. [ Information ] A “miniature version” of this Shuriken Magnet is now available on the following page. “mini-Shuriken Magnet — Ninja Weapons” Caution Please be careful not to…
Here are some weapons shrunken down to fit the 13 series H&K G11 FMG Scar-H Kriss Vector SSG-552 Thompson (Tommy gun) Keltec KSG bullpup shotgun Mateba semi auto revolver BFR scoped revolver SITES Spectre M4
Dies ist ein Waffen Ständer für mein Airsoft Gewehr. Damit lässt sich die Waffe wunderbar horizontal präsentieren. Das Magazin ist völlig neu designed, inspiriert habe ich mich von den Magpull und ETS Magazinen. Zum verbinden des Magazins…
I had a lot of fun making the axe for my Orc warrior skin and decided afterwards that I needed to make a few more weapons. Every weapon in the pictures consists of multiple pieces and requires assembly but I have included a version of…
Wanted to make some probably decently proportionate katanas.
High poly version - https://social.thangs.com/m/220439 Category: Toy & Game Accessories
This is Minifigure of "Tomislaw Apoloniusz Curus Bachleda Farrell". A famous Kurvinox character from legendary "Kapitan Bomba" show made by Bartosz Walaszek. You have two ways of printing it: You can print it as parts and glue them…
2 Katanas and a holster
World of Warcraft Dwarf with Armor and weapon. Customer ordered this from us and backed out. I thought it looked great.
This is a 1:32 scale model of the only crewed spacecraft to successfully land on the moon. I’ve spent 5 years carefully researching the LM from the inside-out, consulting thousands of reference photos and technical drawings. Although this…
The design draws inspiration from Altair's TAPO C200 Bracket, leading to the creation of a new design that incorporates the Original Mount. This addition eliminates the need for Bolts and Nuts in connecting the original mount.…
2026 isn’t just another year: according to the Chinese Zodiac it’s the Year of the Fire Horse . Translation: elegance, energy, and a dash of “I’ll trample you if you get in my way.” This model isn’t here to bring luck, it’s here to steal…
Mini 13: Figurine System Compatible Melee Weapon Set, includes 5 weapon designs: Scimitar Shortsword Longsword Sabre Katana
Seems like you want to build a Hexapod. Don't know why but since you're here, might as well tell you about the most important features about my design: Cheap: 120 € (see Parts (toBuy) file) RGB: 271 individual RGB LEDs Cable management:…
Since my child has always lost his brick Minecraft tools and weapons, I decided to rebuild them. Furthermore, I have already created a possible variant of the new Mace 1.21. In total I offer the following items here - Sword - crossbow -…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
please leave a review if you like this model and let me know what you would like me to make next
![Herb Box for Pax Vaporizer Case [Check Description for the Case Link]](https://media.printables.com/media/prints/705919/images/5538669_7055d50e-be23-4379-96a0-053a71de9784_400f7731-c4be-42be-80da-203238f3f178/img_7357.jpg)
