149 887 modeli
I could not find a scraper sporting a hex pattern, clearly this had to fixed. Perfect for scraping prints off your build plate, as well as your other scraping-needs. Should be printed with .15 or smaller layer height to make the edge…
HUGE UPDATE 9/13/2024: Dummy 13 v1.0 is now available! Check out the new and improved version of Dummy 13 here. This page will keep the previous beta files to ensure that no one's remixes are broken. Dummy 13 uses a CC BY 4.0 license!…
NO, THERE IS NO WAY TO GET A LICENSE TO SELL THE BOX COMMERCIALLY. MY DESIGNS WILL ALWAYS BE FREE FOR NON-COMMERCIAL USE ONLY. PLEASE STOP ASKING! The design is based on the " Tool box parametric " by Yanev and provides some more options…
Please let me know of any issues. I am very active in this community and usually respond to issues before the next day. There are no current issues with these models now, as far as I can tell. I have tested on all the major Slicers.…
A 3 X 3 grid of 1 layer high squares for checking that the bed is level. To be used when performing Bed Level Correction as described in https://help.prusa3d.com/en/article/bed-level-correction_2267 . Print instructions PrusaSlicer's…
Lucky 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
Let's mix things up with another type of dragon: The water dragon! This creatively designed and articulate "Water Dragon" model is engraved with intricate details that capture the imagination, giving it a sense of mystique and fantasy!…
Dimensions (LxWxH) 186,9 x 66,7 x 33,8 mm (100% scale) Basic information The model is divided into 7 movable articulated segments, which grant the model with lifelike movement, and a high range of flexibility. The model was designed to…
This is a variable length, print-in-place, articulated bone-dragon. Choose the version that you want, scale to your liking and print away! (the one in the thumbnail is the 30-segment version) Printing Supports: None required! Adhesion:…
No supports required. Just slice and print!! 4 Versions available: Shark_v4_A.stl: Original design, movable jaw Shark_v4_B.stl: Friendly face, movable jaw Shark_v4_C.stl: Original design, NON-movable jaw Shark_v4_D.stl: Friendly face,…
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…
Magnet Size 6x2mm * for commercial license, Please visit my Patreon
Its a Remix from AKinferno remix :) you find the original on Thingi ID 5383489. The original cames from WheatlyLaboratories Axolotl and McGybeer's "Articulated Lizard" and the head comes from “Schlossbauer” Axolotl. We painted it in…
This cute and simple dinosaur friend makes an excellent desk companion and comes in two different varieties, shorter and longer legs. The difference isn't massive between the two but I thought it would be best to give folks choice. In the…
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
News 2024-04-10: Please also check out my new Blade Dispenser for this Bed Scraper: This is the XL version of my popular Optimized Bed Scraper with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer! Each blade…
Mini 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
For the most up-to-date version of this design, check out the Makerworld version. It's the original threaded dragon egg, great for Easter egg hunts, gifts, and Game of Thrones fans. This is my made-from-scratch design from 2022 that has…
Low Poly Howling Wolf. Print Your Pack!! Great for Testing Input Shaping!! Thank you Thomas Sanladerer for the feature ;) Commercial Use License: https://cults3d.com/:1225367 65 cent Donation: https://cults3d.com/:1225394
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) This has become one of my most popular prints, and is a “remaster” of one of my older Deadpool sculpts, that now requires no supports!
IMPORTANT Read the description carefully before print! Check the changelog at the bottom before printing, there might be updates to the model The original model and the parametric one are not stackable with each other! Prusa Mini version:…
Update April 14, 2024: Updated model to fix where a couple of the sections were sticking together. Upgrade your 3D model collection with our incredible Bone Dragon model. This well-articulated masterpiece designed by the Bearded Printer…
An improved version of my previous design, now with articulated legs. No supports or assembly required. Just slice and print!! Updated 5.1 design with stronger front leg links. Updated 5.2 design fixing the head not touching the plate.…
This design improves the original Bambu Lab reusable spool holder in the following ways: Allows you to see how much filament is left on the spool and uses less filament to print the spool due to the hexagon pattern on the sides. Also, the…
Get the latest version here → Charger Cable Organizer final edition -- THE CABLE WINDER II -- This design is an updated and improved version of my popular design “ Charger Cable Organizer ” Thanks to all that posted feedback and makes of…
Orginal link not opening due Thingiverse system issue Im re uploaded This snake can be printed at once, with no assembly needed after printed. No supports needed. Head is bigger now and some issues fixed on drawing. Prusasilcer head gone…
🏆 Thrilled to share that I've been nominated for Platform Designer of the Year at the 3D Printing Industry Awards 2026! If you enjoy this model, I would be incredibly grateful for your vote. [Click here to vote for Thorin Oakenshield]…
IMPORTANT Please download the "BentoBoxV2 2023XXXX.3mf" project 3mf file and “BentoBox20 User Guide 2023XXXX.pdf” Descriptions, BOM and build instructions are in there. I try my level best to make it as comprehensive as possible. Use only…
This is probably final evolution of my parametric funnels - with an exposed vent this funnel will be a breeze to keep clean, and although it may not suit all situations, if you need a parametric funnel with a bent spout or a funnel with a…
Projectvideo: https://youtu.be/SNWnS3XnjX8 I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of…
Update on June 21, 2022: Thanks to everyone who has been printing and sharing this design! When I first uploaded it, I had no idea that what I considered kind of a goofy design would be so popular! It is very cool to see how far it has…
🐱 Cute Articulated Cat 🐱 Want to get a commercial license for all my 3D Models? Check out my Patreon! https://www.patreon.com/symbiance Can be printed multi & singlecolor! Model is about 90mm long and 20mm high. It can be sized to your…
Update 2 (8/22/25) It's here! Version 2.0 of the riser with tighter fitting vents that release easier and a tool hole to release the vents. I've also put in tabs to hold LED strips. Thanks to my fellow Elegoo Discord server members for…
If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…
A compact and satisfying G26-style fidget keychain featuring a smooth, functional sliding top. Designed for stress relief, display, or everyday carry, this mini model keeps the iconic look while staying completely safe, non-functional,…
Print in PLA so you dont damage the printbed. Check out the new larger model at: https://www.printables.com/model/291609-bed-scraper-mk2-8g-25min Still uses only 8g and prints in 25min. Print instructions Click print =)
If you want to sell my model commercially, please check my patreon website https://patreon.com/sunset3d?utm_medium=social&utm_source=twitter&utm_campaign=creatorshare If you do commercial sales with my design without paying the amount,…
This is a large threaded egg. It was designed to be large enough to hold one of McGybeer's articulated dragons (printed at the default size). Looks particularly good in multicolor coextruded filaments. It will print OK without supports,…
Updates 01-03-2023: Uploaded a new redesign. 06-12-2021: Fixed mesh issue with Basin_3x1, updated Basin_3x1.stl. 20-07-2021: Fixed the sizes of BasinCover_3x3, 3x1 and 1x3, small fix parametric parameter. 06-07-2021: Added extra drainage…
Recommended Filaments: PETG: https://amzn.to/45juHZv TPU 72D: https://amzn.to/4l08AMi (for indestructable strength, can print on Bambu AMS) If you think there is still not enough wind, go get an electrical fan please. A hand fan can only…
Would you like to make extra income selling these planters (and future new models)? Please feel free to check the models with the included commercial license here:…
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
Dimensions (LxWxH) 164,5 x 65,75 x 42,7 mm (100% scale) Basic information Print in place articulated Hammerhead shark. The model was inspired by the Great hammerhead shark, the largest species of all hammerhead sharks. It can grow up to…
Hi everyone. I'm P1lotz and I am a Danish student, and I really like to make 3d models. This time I have made a Christmas articulated dragon, for Christmas. It is supposed to have a red stripe like a candy cane :) I didn't paint the…
I updated “the most articulated Snake ever!!!” that the segments can not be rotated complete 360 degree anymore and holding better together. I added a test file that you can check before, if your printer settings will work without…
https://www.buymeacoffee.com/maxt ---------------------- 2 versions in one package: Without a recycle logo on the side With a recycle logo on the side Why should you use this model and not the others? It won't break, ever (as long as you…
Two versions of the a display shelf that have customizable “grills” (or support walls). Notes: If printing this on a Prusa MK3S+, then the .stl files MUST BE SCALED to 85%. The grills were designed to snap in place without the need of…
Dimensions (LxWxH) 132 x 150 x 32mm (100% scale) Basic information The design was inspired by the Green Sea Turtle, which is undoubtedly one of the most iconic sea animals. The model is is split into 6 movable parts: a shell, which serves…
Modeled from scratch, inspired by lwx007's design: Thingiverse #5685812 I saw some comments about difficulties with the original model requiring assembly or gluing, and decided to make a model that can be printed in a single piece and…
Gridfinity Ultra Light Bin Generator Online Check out the Gridfinity Ultra-Light Bin System. With so much to print in the Gridfinity universe, this system helps you save time, filament and money, allowing you to print even more Gridfinity…
Step into the enchanting world of 3D-designed articulable creatures with the Baby Dragon model by the talented Bearded Printer. This remarkable, intricately detailed 3D model serves as a fantastic addition to any dragon collector's trove.…
ℹ The teeth are a bit sharp, so please be careful! As you’ve probably noticed, the head can be attached, there are two different versions available: a “Hard to press in” and an “Easy to press in” version. Choose whichever you prefer, one…
I designed this Articulated Rose model by remixing an old rose model and adding articulated feet to it (apparently this is a thing now). Hope you like it! Features Easy to print Cool decoration Last minute valentines day present It is…
Santa Hat now available! Download it here! A base/diorama builder is now available for download for this mini figure model! ___________ IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS Please note that I am sharing my designs to any one to…
28.12.2025 / New Multipart Version (Leg Plug In System) 🆕What’s new? The octopus legs can now be printed separately without any issues. Since many people had problems with bed adhesion when printing the legs, this should now fix that…
UPDATE 12.09.2025: I modified the tail so its no longer fragile and should stay connected with dragon. Caution is still needed, when removing dragon from the build plate. To be safe, wait for the bed to cool down and carefully remove link…
About the Scrapers: With a length of 86 mm and a thickness of 5 mm, the scrapers are very compact. The grooves on the side of the handle provide a firm grip. The angle of the front wedge is 26.6° and is therefore quite robust. Of course…
Easy 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
The Chinese Articulated Dragon When creating my dragon, I was inspired by the principles of FLEXY models, and Chinese mythology. According to mythology, he has the Horns of a Deer, the body of a Carp, the paws of a Tiger, and a bump on…
Hi everyone. I am P1lotz , a professional 3D artist. I have been working in the field since 2019 and specialize in creating articulated creatures, particularly dragons. With that said, let me present to you my new Demon Dragon! First of…
Print, assemble and play directly, no screws needed 8-11
*** Free to print, NOT to sell *** For Commercial Rights, you must join my Club. Dec 15 - Informed there may still be an issue with the links sticking. I will correct this this weekend. Until then, just Split the model into parts or…
🎨Try KOGI LAB for free at kogilab.com ! Print in Place Fully Articulated Skeleton Hand License Notice: This model is free for personal, non-commercial use only. If you'd like to sell physical prints or monetize it in any way, please visit…
*** Free to print, NOT to sell *** Thanks to sunset and sunset_3d_design for uploading this great model! UPDATE 12/11/2023: Added v9.5. Fixed the fused segment from the new PrusaSlicer updates. I moved the “Spikey” models into the archive…
Warning! The TS80 insert with large cable compartment was uploaded with the wrong dimensions. Don’t print it if you have downloaded it before 28/2/2023. A new version has been uploaded with the right dimensions. Design I've created my…
🎨Try KOGI LAB for free at kogilab.com ! Print in Place Articulated Flexy Chameleon Hey everyone! A fun 3D printable chameleon that you can place on your desk, shelf, or anywhere you like. Designed as a simple one-piece model, easy to…
🎨Try KOGI LAB for free at kogilab.com ! Print in Place Articulated Flexy Snake Hello, I’m excited to share this articulated snake model, the design is fully articulated, so it moves just like a real snake – perfect for desk toys,…
No supports needed. Make sure that the bed is clean and the first layer adheres properly. It is a good torture test for print bed adhesion and filament retraction. Good luck and happy printing ! ^-^ *Version 1.35 has improved legs so they…
Added a version with the accent embedded in the model MMU or AMS is needed unless you want to try and do a manual filament change The stand is designed to hold the phone with or without a case. Accents on the side are printed separately…
A 100% 3D printed Smartphone-holder-arm that offers, at least, three axes. And the option of double braces between the axes. In the standard configuration, the arm easily supports around 500 grams in any position. The versatility of this…
Support my work by leaving a like and follow Get early access to more models on my Patreon Video : https://www.tiktok.com/@body_3d/video/7041923365627563269 Don't Forget to Follow me on Category: Toy & Game Accessories
Dieser Bed Scraper ist das ideale Werkzeug für alle, die ihre 3D-Drucke sauber von der Platte bekommen wollen. Es wurde speziell entwickelt, um das Druckbett vorsichtig zu reinigen und fertige Drucke sicher zu entfernen, ohne die…
This minimalist bag clip is a simple, reliable way to seal open coffee bags and keep your beans or grounds fresher for longer. Designed for fast printing with no supports , and strong enough for everyday use. Perfect for coffee bags, tea,…
It's a fully printed, pocket size crossbow Have fun! don't hurt anyone How to make it print the file kitcard_crossbow.stl seperate all the parts (maybe using a small wire cutter) take the part with the R and put the pins in connect the…
This articulated axolotl is a remix changing the head in order to make it more round and less edgy. I additionally fixed a part o the 3D model where a link was slightly fused together. Features Looking cute Easy to print (pre-supported…
Fully 3d printed crocs shoes “CrocsL/R” and “Holder” printed with Overture TPU ( https://amzn.to/40n8I0D) (390 g) for the shoes I used: 2 walls 15% infill (gyroid) for the holder 2 walls 5% infill (monotonic) “Mount1/2” printed with PLA…
Updated 10/30/2023: Based on a lot of the comments, you may need extra clearance on the eye part. In PrusaSlicer, you can set an “XY size compensation” of around -0.1 to get more clearance without shrinking the whole part. Other slicers…
Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…
MakerBot's T-Rex Skeleton is a masterpiece. Too bad MakerBot has ignored fans' long-time cry to fix some obvious and critical issues. Thus I made the following fixes to make the model printable: --I fixed tail parts A and B. Tail part A…
A simple bed-level test to make sure that your printer is leveled correctly !!only print one layer!!
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Large and Small Heart Layered Fidgets 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15-20% Infill Dimensions of Large Heart Layered Fidget: 4in x 4in x 7/8in Dimensions of Small Heart Layered Fidget: 2 3/8in. X 2 3/8in. X 7/8in.…
🦊 Flexi Fox – cute articulated 3D model, prints in one piece and moves smoothly! ✨ Perfect for any collection or gift. 💼 Get all models + commercial license on Patreon 👉 patreon.com/c/FlexiMania_
Mobile phone stand in a modern curved design. The picture shows the stand with an iPhone 11 Pro Max. Also check out my curved iPad holder and other designs.
Edit: Thank you for 15.000 Downloads! I've made a 2025 Update of the model! You can download Fünther here! I wanted to make a Flexi Dinosaur since I first saw the Flexi Rex. As my son had his birthday last week I decided this would be the…
Collapsible Basket Optimized for 3D printing This basket prints in place as one part and doesn’t require any supports. It prints flat but folds it into a basket! This is a remix of the first collapsing basket I designed, that version uses…
I'd recommend printing the full set Print from ABS/ASA/PETG - I don't recommend PLA USE the thinnest LH possible for your printer After install, recalibrate your printer and redo input shaping.
Print in Place Stackable USB Cable Winder. Both smooth sided as well as knurled. Also include code for Color Change Print. Inspired by https://www.prusaprinters.org/prints/55627-cable-puck-print-in-place-cable-management Print…
No need for any supports, however it has a large overhang with its crystal horns which is a good test. It will take time and I do recommend a raft or brim to be added for maximum bed adhesion and it must be taken of easily otherwise the…
Easy to print - Easy to handle Perfect for openeing your boxes New model: https://www.printables.com/model/1113064-box-cutter-box-opener-v20-tested
Dimensions (LxWxH) 110 x 65 x 19 mm (100% scale) Basic information Trilobites have been extinct for quite a while now, so you most likely won't get the chance to hold one in your hand any time soon. But here's a great alternative for all…
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
A very quickly designed planter for Vase mode printing. I used a 0.6mm nozzle, 0.35mm layer height and a 1.45mm line width. If you want to riff on the design the Fusion 360 model is attached (please remember attribution if you do!) Print…
Dimensions (LxWxH) 170 x 84 x 53 mm (100% scale) Basic information Great white sharks are definitely among the most fearsome and legendary ocean hunters, so it is not surprising, that everyone would love to have one in their collection.…
Print info Nozzle: 0.4 mm Infill: 0% Supports: I use Snug supports, need to be painted like on the picture below Model Overview Two versions of Cats: Normal (white one) , Fluffy face (black one). Made bumps on face and paws so its easy to…
ℹ The teeth are a bit sharp, so please be careful! As you’ve probably noticed, the head can be attached, please be cautious when snapping the head on to avoid injury! ℹ Tips for printing: Filament: PLA Supports: No! Layer height:…
Santa Hat now available! Download it here! A base/diorama builder is now available for download for this mini figure model! ___________ IMPORTANT NOTE ON COMMERCIAL USE OF MY MODELS Please note that I am sharing my designs to any one to…
