1 / 5
Jupiter-12 2,8/35 LTM Lens Bubble (39mm x 26 TPI Whitworth) — zdjęcie 1
1 / 5

Jupiter-12 2,8/35 LTM Lens Bubble (39mm x 26 TPI Whitworth)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A secure and convenient way to store and transport a Jupiter-12 LTM lens.

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
47
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

I designed this model to be a superior alternative to the factory caps and keeper that originally came with Jupiter-12.

This model upcycles a cap from P&G laundry detergent such as Tide/Aerial/Gain. You'll need one of the new style caps from 2024 onwards (See photos).

The cavity is 27mm deep and will accommodate and protect the protruding rear element of Jupiter 12.

This model will also accept a 90mm APO-Rodagon and other enlarger lenses with large protruding rear elements.  I have made variations of this model with different cavity depths for Enlarger / LTM taking lenses, you can download them in the link below.

If you need a general purpose/blank cap for remix or use as general purpose container, you can find it here.



Thread specs.: Leica thread Mount, 39mm x 26 TPI Whitworth. +0.4mm diametral clearance for a loose fit.

Printing suggestions:

0.15 layer height
avoid crossing perimeters
use scarf joins and randomize seams
Tested with PLA and PETG

Avoid variable layer height. The handfeel and thread engagement is much nicer with constant layer height.

Tagi