Liczymy pasujące modele…
Trichter für 5 Liter Kanister zum aufschrauben. Gewinde M39,5 x 4. Es gibt mehrere dieser Trichter, aber bei keinem paßte das Gewinde für meinen Kanister. Empfehle das Gewinde mit der niedrigst möglichen Layerhöhe zu drucken; empfehle…
I recently got a Canon LTM 50 1.8 for my Canon P and remembered that I had made the MUP to LTM mount. So I stayed up late making some L39/M39/LTM - whatever you want to call this mount - stuff. First is a L39 to Fuji Adapter - this post -…
Mix Halo Reach, airsoft, 3D printing and GBBs, and you get the M392 DMR as a GBBR. This conversion kit brings a 1:1 scale Halo Reach DMR into airsoft. Now you're ready to defend Reach from the Covenant. This project used an AAP01 as a…
Screw on lens cap for LTM lenses. You can print threads, even 0.977mm pitch threads - if you can't it's a skill issue.
I bought another enlarger lens to do a sharpness test between lenses but wasn't about to drop $50 for a used lens board. With some CAD magic and a few drafts, I was able to come up with this. This lens board is for M39 lenses and includes…
Update - Dec - 28 - 2021 After one and a half years doing those conversions and many successful lenses I'm now pretty confident with this design. The M36 thread that act as the focus helical has been redesigned now with a dual start 1.5mm…
I have this broken Yashica for sometime and now since I have access to 3D printer and Fusion 360 software I was able to successfully achieve this conversion. The focus helicoid is a simple M25 thread and it was inspired by the early leica…
After almost two years of development I recommend you check my up to date design if you interested in such subject. www.thingiverse.com/thing:4540492 This is a test of concept for converting Point and Shoot lenses to M39 mount. It can be…
Case to hold an LM393 light sensor. I am using the LM393 to measure the pulse indicator on an electricity meter. The sensor is plugged into a microcontroller running mysensors.org sending the data into my Home-Assistant instance To get…
The M39 thread has been placed so that the red focusing mark on the lens is facing up (on my copy at least). The red dot on the adapter is “kids' jewelery” I found at a cents store.
I printed at 102% XY scale, Z 100% (depends on your printer/filament) layer 0.125 Use graphite lube to make smooth joints.
This lens is really prone to reduced contrast from stray light, so I made the hood a bit longer. I only tested this on the Leica Thread Mount (M39 thread) version of the lens. This slips on the outside of the lens and holds on with…
Pied gauche de remplacement avec réutilisation du patin flex Category: Replacement Parts
I made the Stand and the Tweezers Fitt my EM393B Multimeter. Works like a Charme. Build in PLA - 45%!!!! Infill - 0,4 nozzle - 0,2 layer hight Org stand: https://www.thingiverse.com/thing:7195643/ Org tweezers:…
These files are for different stack heights for the lens mount for Dunco enlargers. Heights range from 3mm to 30mm Feel free to contact me with any questions or requests
Deckel mit M39 x 0,5 Gewinde zum Aufschrauben auf das Leica Summicron 50mm f2 oder andere Objektive mit gleich großem Gewinde. Drei verschiedene Ausführungen. Den Teil mit dem Gewinde mit der niedrigst möglichen Layerhöhe drucken.…
Trichter für 5 Liter Kanister zum aufschrauben. Gewinde M39,5 x 4. Es gibt mehrere dieser Trichter, aber bei keinem paßte das Gewinde für meinen Kanister. Empfehle das Gewinde mit der niedrigst möglichen Layerhöhe zu drucken; empfehle…
I recently got a Canon LTM 50 1.8 for my Canon P and remembered that I had made the MUP to LTM mount. So I stayed up late making some L39/M39/LTM - whatever you want to call this mount - stuff. First is a L39 to Fuji Adapter - this post -…
As it is a basic design for verification, there is a risk of the lens falling off while focusing. Please use it carefully.
This is a simple filament guide to use a cheap LM393 sensor as filament sensor. It is inspired in the filament sensor of Prusa i3 mk3, but simplifying the requirements and the cost. BOM: 1 x ball of 3.85mm. You can get this disassembling…
Mix Halo Reach, airsoft, 3D printing and GBBs, and you get the M392 DMR as a GBBR. This conversion kit brings a 1:1 scale Halo Reach DMR into airsoft. Now you're ready to defend Reach from the Covenant. This project used an AAP01 as a…
Deckel mit M39 x 1 Gewinde für Kamera Gehäuse. Zwei verschiedene Versionen. Den Teil mit dem Gewinde mit der niedrigst möglichen Layerhöhe drucken. .................... Cover with M39 x 1 thread for camera body. Two different versions.…
Gegenlichtblende für das Nikon Nikkor 5cm f2 M39 LTM Objektiv mit M40,5 x 0,5 mm Gewinde. Benötigt Stützmaterial. Den Teil mit dem Gewinde mit möglichst niedriger Layerhöhe drucken. .................... Lens hood for the Nikon Nikkor 5cm…
Ablageschale für das Avenon Super Wide 21mm f2,8 Objektiv mit M39 Leica LTM Anschluß. Die Schale ist im Durchmesser um 1 bis 2 mm größer, damit sie noch mit Velour ausgekleidet werden kann. .................. Storage tray for the Avenon…
Deckel mit M39x1 Gewinde für die Anschlußgewinde von Objektiven mit LTM Leica Gewinde. Der Deckel ist mit inneren Tiefen von 10mm, 16mm, 22mm und 26mm verfügbar. Der Deckel mit 10mm Tiefe paßt auf alle normalen Objektive. Manche…
A 3D printed adapter designed to mount the Lomography Fisheye No.2 35mm film lens system onto the Leica M39 LTM screw mount standard. This allows the circular 170 degree fisheye lens from the Lomography 35mm film point and shoot camera to…
This is an EF-M to 39mm screw-mount adapter for M39 SLR lenses , commonly found on early Zenit-style Soviet lenses. Tested with an Industar-50 50mm f/3.5 M39 SLR lens on a Canon EOS M body. This is not for Leica Thread Mount / L39…
This is an Enlarger Lens Bubble / Protector / Keeper that mates with the screw-on measuring cap from P&G laundry detergent such as Tide / Gain / Aerial. Forming a protective enclosure. It will also fit other Leica thread mount lenses such…
Updated on 11/7/19, scroll down to that for better information! I downloaded an existing M14 EBR model from an upload on sketchup. Original model credit to Rabid Beagles there. https://3dwarehouse.sketchup.com/by/wujoberto Then I used…
M39 to EOS M adapter. Printed in Carbon fiber PETG at 0.1 mm layer height and support under the FD mount extensions. Adapter height should be 10.8mm. Wet sand with 400 grid if required.
This is a simple focusing adapter that I made for my Rodenstock Omegaron 150mm f/4.5 enlarger lens to be used with my Sony E-mount cameras. This particular enlarger lens has a 39mm diameter thread with 0.75mm pitch -- beware that many…
Can be secured by screws or glue, support not needed. For more details, print in 0.1mm layer hight. Recommended wiring diagram:…
Use supports for E-mount Thread clearance is 0,1mm. Flange focal distance = 28.8 mm. So far tested only with industar-61 from FED camera.
m39 to M4/3 adapter. Now it's fits accurate and also have focus to infinity too. M39x1 (flange 28.8mm) to M4/3 (flange 20mm) I also added ribbed tube to avoid reflections. It's will be better if you will print it in black color with matte…
This is an adapter designed to mount lenses from cheap broken Point & Shoot cameras on rangefinder cameras that use the M39/LTM mount like old Leicas. The design is printed in multiple parts which are correctly oriented for ease of use.…
Printer brand: Anycubic Printer: Kobra Rafts: No Supports: No Resolution: 0.2 Infill: 40 Filament brand: Hi-Tech Plast Filament color: Black Filament material: ABS
Adapter T-43 4/40 (Smena 8M) for m39 thread (using a helicoid from the Industar 61 L / D lens) It is necessary to get rid of the lens block of the lens Industriar 61 L/D. (Look for instructions on YouTube) Remove the T-43 lens (Look for…
Supports: No Resolution: 0.0977 or 0.1954mm layer height (multiples of the thread) Notes: If you're printing in ABS, make sure to account for the shrinkage. Post-Printing Screw in the lens carefully for the first time to make sure you're…
I designed a small pen, pencil and caliper holder that I can move easily around the work bench and does not easily fall down. In my shop I like to have as much free work space on my desk as possible. Personally I do not like to have a lot…
This example was printed in CF reinforced PETG at 0.2mm layer height.
DISCLAIMER Due to the different distance between the lens and a DSLR sensor/film, the lens can not focus properly, it only focuses on very short distance.
Presenting a two-part model consisting of a case and cap, tailored for the LM393 (4-pin) sensor. Streamline your assembly process with this user-friendly design—no supports required. Simply slide the LM393 sensor into the case and…
M39 to EOS M adapter. Printed in Carbon fiber PETG at 0.1 mm layer height and support under the FD mount extensions. Adapter height should be 10.8mm. Wet sand with 400 grid if required. Empiricus@Dremomys Category: Camera
This is part of my attempt to create 8mm(R/S) / 16mm film scanner, where the two pieces will be connected and attached to a Raspberry Pi HQ camera (C-mount) and then a Schneider Componon-S F2.8/50mm lens (M39 thread). Short design video…
