Lens Bubble for Enlarger Lenses. (L39/M39/LTM)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lens Bubble / Protector / Keeper for your L39/M39 Thread Enlarger lenses, also fits some smaller LTM taking lens.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This is an Enlarger Lens Bubble / Protector / Keeper that mates with the screw-on measuring cap from P&G laundry detergent such as Tide / Gain / Aerial. Forming a protective enclosure. It will also fit other Leica thread mount lenses such as Jupiter 12 and Industar-61 L/D.
Available in 3 different cavity depth of 27, 22 and 12mm to accommodate large protruding rear elements, it is available in both LTM/L39 and metric M39x1 versions.
TL;DR:
If you are not sure which version to download:
For enlarger lenses, try L39 / 27mm cavity version first.
For Leica mount taking lens, try L39 /12 mm cavity version first.
Thread Specs:
L39 Leica Thread Mount - 39mm x 26 TPI, 55° Whitworth
ISO Metric - M39 x 1mm
Both threads were enlarged by 0.4mm to accommodate 3D Printing tolerances and ensure a loose but secure fit.
Maximum lens sizes
Lens diameter 57mm.
27mm cavity version - Up to 38mm in front of the flange.
22mm cavity version - Up to 43mm in front of the flange.
12mm cavity version - Up to 53mm in front of the flange.
P&G Measuring cap. This model is designed to use the newer style measuring cap introduced around 2024. See photo.
Model is tested to fit:
APO-Rodagon 90/4 - use 27mm version
EL-Nikkor 50/2.8
Jupiter-12 35/2.8
Industar-61 L/D 50/2.8
I welcome your suggestions and comments, and if you want a variant in a different threads for a lens that might fit, please let me know.
Printing Suggestions:
0.15mm layer height.
Do not use variable layer height.
Avoid crossing Perimeters.
Use scarf joints and randomize seam positions.
Tested with Sunlu PETG.
A blank, general purpose version of this container can be found in the link below.
.