Adapter T-43 4/40 for m39 thread
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter T-43 4/40 (Smena 8M) for m39 thread (using a helicoid from the Industar 61 L / D lens)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Adapter T-43 4/40 (Smena 8M) for m39 thread (using a helicoid from the Industar 61 L / D lens)
- It is necessary to get rid of the lens block of the lens Industriar 61 L/D. (Look for instructions on YouTube)
- Remove the T-43 lens (Look for instructions on YouTube)
- Insert a T-43 into the adapter
- Insert the adapter into the Industriar 61 L/D helicoid
- Fix with a decorative nameplate (one of two)
It is possible to crossing over infinity, but you can shift the lens inside the frame to achieve the right position.
The adapter fits very tightly and does not require additional fixation.
Optional: From below, fix the junction of the lens and adapter with a drop of nail polish.
If desired, you can print the lens hood.
Print Settings
Printer Brand:
Anycubic
Printer:
Kobra
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40
Filament: Hi-Tech Plast ABS Black
Category: Camera