Creality Ender 3 S1 Bed Cable Nozzle Brush Holder (macro included)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bed cable mounted nozzle brush holder for the Creality Ender 3 S1. Fast, secure nozzle cleaning without screws.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Creality Ender 3 S1 Bed Cable Nozzle Brush Holder
This is a compact nozzle brush holder designed specifically for the Creality Ender 3 S1. Instead of mounting to the frame or using screws, it attaches directly to the bed cable, making installation quick while keeping the brush in a consistent position.
The holder was designed around Klipper-based automatic nozzle cleaning, allowing the printer to clean the nozzle before every print without manual intervention.
Features
Mounts directly to the Ender 3 S1 bed cable
No additional screws required
Compact and lightweight design
Secure fit
Works with standard metal cleaning brushes
Ideal for automatic nozzle cleaning macros
Suitable for PLA, PETG and other common materials
The design intentionally keeps the brush close to the rear edge of the bed so the printer can clean the nozzle before moving to the purge line, reducing filament buildup and improving first layer consistency.
Recommended material
PETG (recommended)
ABS / ASA also suitable
PLA is not recommended because of the heat generated near the heated bed.
Klipper users
If you are using Klipper, you can fully automate nozzle cleaning before every print.
My setup performs the following sequence:
Heat the nozzle
Home the printer
Generate the adaptive mesh
Move safely above the brush
Clean the nozzle at multiple heights
Move directly to the purge line
Purge the nozzle
Start printing
This significantly reduces filament blobs and improves first layer reliability.
I've also uploaded my Klipper CLEAN_NOZZLE macro used with this brush holder. Feel free to use it as a starting point and adjust the coordinates to match your own printer and setup.
Installation
Insert a standard metal brush into the holder.
Clip the holder onto the bed cable.
Adjust your Klipper cleaning macro to match your brush position.
Verify nozzle clearance before running the cleaning routine.
Always test movements slowly the first time to ensure proper alignment.
If you use this model, I would appreciate seeing your print and your automatic cleaning setup. Feedback and improvements are always welcome.
Safety
Always verify the X, Y and Z coordinates before running the cleaning macro. The included macro is configured for my Ender 3 S1 and may require adjustments for your printer.