Extendable Towel Rail Dryer Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A smart, space-saving extendable arm that mounts perpendicular to crowded towel rails to dry multiple towels easily.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Tired of damp, crowded towels that never dry? Standard bathroom heated towel rails often have pipes placed too close together. This means towels overlap, trap moisture, and take forever to dry. This Extendable Towel Rail Dryer Arm is a smart, space-saving solution. It mounts perpendicular to your towel rail, extending the hanging area forward. You can mount multiple arms side-by-side to hang several towels neatly in front of the heater.
Why This Model?
This design solves standard bathroom crowding by offering a modular, adjustable system with a sliding print-in-place arm and tension-free grip, allowing you to optimize your drying space effortlessly.
Features
Designed for maximum practical organization and convenience, this model includes:
Print-in-place telescopic sliding arm with flat-bottom design and zero support requirements.
Telescopic range from ~20 cm to over ~36 cm with a secure 4 cm internal overlap.
Rounded upper edges and vertical end-stop to prevent towel slipping or tearing.
Adjustable support bracket with wall horizon compensation and vernier lock pin with expanding split-prong tabs.
Technical Specifications
Detailed physical configurations, variants, and compatibility specifications are listed below.
Technical Parameters
Towel Rail Pipe Profile: Designed strictly for 19 × 45 mm oval-profile pipes.
Wall Clearance Range: Adjustable from 50 mm to 80 mm (distance from the pipe to the wall).
Arm Length: 200 mm (folded) to 360 mm (fully extended).
Connection: Heavy-duty slide-on dovetail joint.
How to Assemble
Follow these simple steps to assemble the printed parts:
Clean any minor printing artifacts from the dovetail joint.
Slide the arm securely onto the vertical dovetail joint of the bracket.
Adjust the wall support leg to match your wall clearance and insert the vernier lock pin into the aligned holes to secure the assembly under heavy weight.
Recommended Print Settings
For optimal print quality and mechanical strength, use the following slicer settings:
Material: PETG, ABS, or ASA are highly recommended, as standard PLA may sag over time under heavy, wet towels.
Layer Height: 0.2 mm (important for the snap-fit locking pin and sliding tolerances).
Infill: 20% to 25% (Grid or Gyroid for structural strength).
Supports: Required only for the Hook and Wall Stopper parts due to the horizontal locking holes and overhanging dovetail, while the sliding arm prints completely support-free.
Support Block
❤ Enjoyed this print? All my models here are completely free for personal use. If you like my design and want to show your appreciation — or help me buy more filament for testing new projects — you can support my work by purchasing this model on Cults3D: https://cults3d.com/:4671244
Commercial License Block
💼 Commercial License & STEP Files: If you want to legally sell physical 3D-printed copies of this model, you can purchase the Commercial License and get editable STEP files on Cults3D here: https://cults3d.com/:4961712