1 / 3
Arachnid hero iron-on — zdjęcie 1
1 / 3

Arachnid hero iron-on

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This design is meant for you to use on your new clothes and show off this summer. Follow the instructions on how to appl

Ocena
0 / 5
Polubienia
4
Pobrania
17
Wydruki
0
Wyświetlenia
91
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

It’s very easy to apply. Just follow these steps:

Print: Use the template I’ve already prepared. I’ve set the thickness to 0.40 mm as this is the ideal thickness: it’s sturdy but still flexible.

Position: Place the piece flat on your T-shirt (I recommend using one made from 100% cotton or a cotton blend).
Protect: Cover the entire design with waxed paper (baking paper).
Iron: Set the iron to a high temperature without steam. Apply firm pressure to the transfer for about 10 to 15 seconds.

Check: Leave it to cool for a moment and make sure the edges are firmly adhered. If any part hasn’t stuck, carefully go over it again with the iron.

Extra tip: To ensure it’s properly fixed, turn the T-shirt inside out and iron the inside (always protecting the printed area with the paper).

To make it last longer (washing and care):

Washing: Wash at a maximum temperature of 30 °C to prevent the print from fading over time.

Tumble dryer: Avoid this at all costs: the extra heat will cause the plastic to peel away from the fabric.

Materials: The file is printed in PLA and prints perfectly, but if you want it to be very flexible, with a rubbery texture and high performance, use TPU.

About this design:

The profile is optimised to adhere well without leaving a thick layer.

The surface is very smooth because I’ve enabled the ‘smoothing’ function.

It prints in a couple of minutes and uses very little filament.

.3mf specifications:

Layer height: 0.20 mm

Total thickness: 0.40 mm

Print bed: Tested on textured PEI

If you print this, it would be a huge help if you could upload photos of yourself wearing it so I can see how it turned out and continue creating more designs. A HUGE THANK YOU FOR YOUR SUPPORT!

Tagi