1 / 4
KRAKEN Motor Fan Mount for 40mm Heatsinks — zdjęcie 1
1 / 4

KRAKEN Motor Fan Mount for 40mm Heatsinks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A remix of DYocis's excellent remix of RoscoeTheDog's Nema 17 Heatsink and Fan Adapter Mount for 40mm heatsinks.

Ocena
0 / 5
Polubienia
3
Pobrania
3
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

This is a remix of DYocis's excellent remix of RoscoeTheDog's Nema 17 Heatsink and Fan Adapter Mount for 40mm heatsinks. I printed mine in LDO Blue ABS using the standard Voron recommended print settings: 

  • Layer height: 0.2mm

  • Extrusion width: 0.4mm, forced

  • Infill percentage: 40%. --> recommended for functional parts that are subject to regular use.

  • Infill type: gyroid or cubic --> cubic is much faster and the same strength as gyroid.

  • Wall count: 4

  • Solid top/bottom layers: 5

  • Supports: None

  • Brim: if needed for your filament

Print two per motor. I used M3x5x4 heatset inserts to secure the fans. And if you want some fan bling too, these work great: Amazon.com: Alinan 6pcs 4010 24V Color LED Mini Brushless Cooling Fan Transparent

In Klipper I configured the two fans to operate together using multi-pin; and then created a Heater_Fan tied to the Extruder.

[multi_pin motor_fans]
pins: {pin_for_fan#1},{pin_for_fan#2}    # just the pins for your MCU without the { braces }

[heater_fan Motor_Fans]
pin = multi_pin:motor_fans
fan_speed: 1.0
heater: extruder
heater_temp: 30.0

I find that if I leave the fans on until the Extruder reaches 30C they drain all of the heat away. Before the fans, using just the heatsinks the motors were averaging 99 - 101C. With the fans, they never get higher than 76C even when printing for hours - and help heat the chamber too!

HAPPY PRINTING and MAY YOUR MOTORS NEVER GET BBQed! 🔥

Tagi