Pointman Nuvia N10/15/20 spool cover for RFID chip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement cover for the Pointman Nuvia ribbon spool covers that contain the RFID chip.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
If you have a Nuvia N15 or N20 printer and get cheap(er) replacement ribbon bands from China, you typically do not get a chip included, so, if you provide your own chip (Mifare Classic 1K, CUID / Gen 2) that you copied the data from an unused original ribbon band from, you will need to replace the cap on the ribbon band. This is what this model is for. It is extra thin, so you can glue your RFID chip on it and it will work just fine from a space perspective.
The Mifare Classic 1K parts are normally 1" in diameter, so they are larger than the spool/cap. If you glue them onto the cap, do it centered well and you can cut off the access around the chip/antenna so it will fit into the printer...