Capacitor mount - TBS Source One V6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for a very large capacitor that allows an install just behind the camera in a TBS Source One FPV frame.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This holder mounts in the frame just behind your camera, allowing you to install very securely a large capacitor that would otherwise jiggle inside there and potentially cause a very bad short. My capacitor is 18mm in diameter, and the mount is compliant so that it locks inside the base groove of the cap.
More pictures are to come when I get the time (need to pull the frame..)
Print out of TPU with 100% infill.
Feel free to ask for different sizes, I might be interested in making them for you if I get the time :)
Cheers!