KTM 500 Trail Tech Vapor Dash mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To seamlessly mount your Trail Tech Dash behind the headlight mask. This is on a 2016 500 EXC. Used M4x0.7 hardware.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
After printing two other models I found online that didnt fit my 2016 ktm 500 EXC, I designed this from scratch. Works perfectly, protected by headlight mask, easy to view, still can see OEM signal light, room for key relocation, uses existing mount that the OEM dash was mounted to. Used M4x0.7 pitch bolts, 2 at length 12mm to go into the Vapor Dash, two at 30-35mm to fasten this mount to the base plate that the original dash used. Suggest nylocks or some other locking nut for the the longer fasteners. I run a small design and prototype consultancy, so my logo is on it.
I used 7 perimeters on 0.2 nozzle, and 50% cubic infill with ASA carbon fiber on Core One. Seems very stout.