1 / 4
GT2 Belt Conveyor Purger for Voron Trident Zero (Goose Belt Purger Inspired) — zdjęcie 1
1 / 4

GT2 Belt Conveyor Purger for Voron Trident Zero (Goose Belt Purger Inspired)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

GT2 timing belt conveyor purger for Voron Trident Zero. CAD included for easy adaptation.

Ocena
0 / 5
Polubienia
5
Pobrania
7
Wydruki
0
Wyświetlenia
218
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Shitsticks Conveyor Purger

A compact conveyor-style purge system designed for my custom Voron Trident Zero.

The project was inspired by the excellent Goose Belt Purger, but is my own implementation built around a standard GT2 closed-loop timing belt instead of a silicone band.

Using a GT2 belt makes replacement easy, allows different belt lengths to be used, and makes adapting the mechanism to other printers much simpler.

The conveyor itself is mostly printer-independent, while the mounting bracket is designed specifically for my Trident Zero.

Please don’t adapt your printer to this model—adapt this model to your printer.

That’s exactly why both STEP and Fusion 360 (.f3z) source files are included.


Features

  • Uses a standard GT2 closed-loop timing belt

  • Conveyor-style purge removal

  • Replaceable Bambu Lab silicone nozzle brush

  • Compact mechanism

  • Designed for ABS/ASA printing

  • Fully editable CAD included

  • Easy to adapt to other printers


Bill of Materials

  • GT2-10 closed-loop timing belt (240 mm used in my build)

  • NEMA17 stepper motor

  • GT2 pulley (20T or similar)

  • 6 × F623 flanged bearings

  • M3 heat-set inserts

  • M3 screws

  • M3 washers (depending on belt width)

  • Bambu Lab silicone nozzle brush


Included Files

  • STL

  • STEP

  • Fusion 360 (.f3z)


Compatibility

This version is designed specifically for my Voron Trident Zero.

The mounting bracket will almost certainly require modification for other printers.

The conveyor mechanism itself is generic and intentionally supplied with editable CAD so it can be adapted to different printers, mounting systems and belt lengths.

The supplied model uses a 240 mm GT2-10 belt, but feel free to modify the CAD for any closed-loop GT2 belt that better suits your printer.


Print Settings

Designed for standard Voron ABS/ASA print settings.

No exotic settings are required.


Assembly Notes

  • Install all M3 heat-set inserts.

  • Check the belt tension before final assembly.

  • Use washers as spacers if required for your belt width.

  • Ensure the nozzle lightly contacts the silicone brush.

  • Modify the mounting bracket to suit your printer if required.


Credits

Special thanks to the Goose Belt Purger project for inspiring the conveyor purge concept.

This is not a copy of the original design. It is my own implementation using a GT2 timing belt and a custom mounting system designed around my printer.

Tagi