Wide Funnel for Handy Silica Dry Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A much wider funnel for the Handy Silica Dry Box, plus an adapter so it also fits the Side Pocket Box.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A much wider funnel for pouring dried silica gel into the Handy Silica Dry Box family, plus a small adapter so the same funnel also works with the Side Pocket Box.
What you get
170 x 109 mm oval mouth, roughly double the long axis of the funnel I had been using — pour straight from a wide pan without spilling over the sides
Adapter for Sidepocket lets the same funnel seat on the Side Pocket Box, so you only need one funnel
Both parts stay put on their own while you pour with both hands on the pan
Wide Funnel 170.0 x 109.3 x 85.5 mm, Adapter 49.1 x 36.2 x 20.2 mm
Fit check
Handy Silica Dry Box: set the Wide Funnel directly into the box opening
Side Pocket Box: snap the Adapter for Sidepocket on first, then set the funnel into the adapter
Modified or third-party versions of either box: check the opening against the STEP files first
Compatibility and credit
My own original design, modeled from scratch in Onshape. It contains no geometry from anyone else's files. It is sized to fit these desiccant boxes for the Bambu Lab AMS:
Handy Silica Dry Box, designed by BamBam Design — https://makerworld.com/en/models/103480-desiccant-container-for-ams-handy-silica-dry-box
Handy Silica Dry Box - Side Pocket Box, designed by BamBam Design — https://makerworld.com/en/models/154298-sidepocket-dry-box-handy-ams-desiccant-box
Full credit for those boxes goes to BamBam Design
Print settings
Bambu Lab P1S with a 0.4 mm nozzle, Bambu Studio 0.24mm Draft profile.
PLA (Bambu PLA Matte on the test print)
0.24 mm layers / 2 walls / 15% infill
Supports: yes, tree (auto) — the funnel lies at an angle and its overhangs need support; the bundled 3mf has both parts supported on one plate
Support me
If this design was useful to you, you can buy me a coffee ☕
Need a different size?
STEP files for both parts are included, and the full Onshape source is public: Onshape document
LICENSE: CC BY-NC (applies to my own design — the Wide Funnel and the Adapter for Sidepocket)