TearDrop Trio: Eye Drop Bottle Holder & Adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Teardrop-handled holder that lifts all 3 eye drop bottles out of the fridge at once. Works outside the fridge too.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The TearDrop Trio is a stylish and practical storage solution designed specifically for keeping your eye drop bottles organized and within reach in the fridge — though it works just as well for eye drops that don't need refrigeration too. This 3D-printed holder features a sculptural, teardrop-shaped handle that lets you lift all three bottles out at once — no more digging through the fridge door shelf.
Available in two versions:
Standard — a clean, solid holder.
Drainage version — includes small condensation holes in each compartment, so any moisture from the fridge can drain away instead of pooling around your bottles.
Key Features
Three-Bottle Capacity: Neatly holds up to three eye drop bottles in individual compartments.
Universal Fit via Adapters: The holder's standard cup size is 26.5mm. A full range of interchangeable ring adapters is included, from 24mm down to 19mm, so it fits virtually any eye drop bottle diameter on the market.
Easy Access: The sculpted ball-top handle makes it simple to lift the whole set out with one hand — ideal if you use drops several times a day.
High-Visibility Color: Designed and printed in orange rather than white specifically to stand out clearly against a white fridge interior — a small but meaningful detail for anyone with low vision.
Sleek, Sculptural Design: A smooth, organic silhouette that looks good sitting in your fridge door or on a bathroom shelf — not just another plastic tray.
Print Instructions
Follow these guidelines for the best results when 3D printing your TearDrop Trio.
Requirements
Filament: PLA or PETG for the holder and adapters (a rigid filament is recommended for dimensional accuracy on the adapters). Printed and tested in Bambu Matte PLA (orange).
Support Material: Not required — the model is designed to print cleanly without supports.
Printing the Holder
Material: PLA or PETG.
Supports: None needed.
Layer Height: 0.12mm (HQ) for the smoothest finish on the curved surfaces; 0.16mm also gives great results if you want a faster print.
Infill: 30%, rectilinear pattern.
Printing the Adapters
Material: PLA or PETG.
Supports: No supports required.
Settings: Same as the holder (0.12mm or 0.16mm layer height, 30% infill, rectilinear).
Sizing: The holder's default cup size is 26.5mm. If your bottle is narrower, use an adapter — the full set ranges from 24mm down to 19mm. Each adapter is labeled with its inner diameter (mm) for easy identification — measure your bottle's neck and pick the closest match.
Assembly
Once printed, simply drop the correct adapter into any compartment that needs a smaller fit, then place your eye drop bottle inside. No glue or extra hardware needed.
Did you print it? I'd love to see your setup! Please upload a make and leave a review to help others find this model.